View Full Version : Buffing Klasse High Gloss Sealant Glaze
CV_Soccer
12-28-2007, 03:38 PM
"Klasse High Gloss Sealant Glaze can be layered as many times as you like with no discoloration. Wait 8 to 12 hours before buffing and then applying the next coat."
Does this mean that I should wait 8-12 hours before applying the next coat, or is it waiting to remove the product before applying the next coat? What am I missing?
Klasse application Guide @ autogeek.net (http://www.autogeek.net/klasse-usa.html)
Think they want you to leave it on for 8- 12 hours, remove, then apply the next coat. Obviously the car should be indoors when doing this.
Jimmie
12-28-2007, 06:33 PM
It's been posted in the past that it's easier to remove if you wait 12 hours before you remove. My experience is it doesn't matter that much. It's still a pain to remove.
ScottB
12-28-2007, 07:03 PM
I find that WOWO works best with Klasse Sealant. Use a small travel size spray bottle. Spray and buff .. then allow to sit (cure) for eight hours. If you get a stubborn spot, spritz and immediately rewipe.
Tonya
12-28-2007, 09:19 PM
CV Soccer ~ Stop Stop Stop and read this... http://www.autogeekonline.net/forum/show-n-shine/8597-well-s-finally-done-lots-pics.html it gets interesting around page 3 of the thread! Trust me take the time to read it. Killr just gave you the best suggestion!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.