01vw18t
12-20-2007, 10:57 AM
A while back a guy at the tech school that i was going to asked me if i could clean his headlights up. i told him i'd bring my stuff down and one day when we werent doing anything there, we would restore them.
PRODUCTS:
soapy water
electric sander
600 grit wet/dry sand paper
2000 grit wet/dry sand paper
3m fine cut rubbing compound
Meguiar's PlastX
PROCESS:
1. wet sand headlight with 600 grit until all the years of crap came off the headlight.
2. then wet sand with the 2000 grit to get the 600 grit sanding marks off and to clear the headlight up some.
3. pulled out the electric drill and an orange pad and polished with 3m rubbing compound until no scratches remained.
4. changed to a black pad and polished with meg's plastX to improve the clarity.
Before:
http://i1.tinypic.com/6odjswk.jpg
http://i2.tinypic.com/6k6zjux.jpg
After:
http://i11.tinypic.com/6stzs5e.jpg
http://i1.tinypic.com/8admz9c.jpg
PRODUCTS:
soapy water
electric sander
600 grit wet/dry sand paper
2000 grit wet/dry sand paper
3m fine cut rubbing compound
Meguiar's PlastX
PROCESS:
1. wet sand headlight with 600 grit until all the years of crap came off the headlight.
2. then wet sand with the 2000 grit to get the 600 grit sanding marks off and to clear the headlight up some.
3. pulled out the electric drill and an orange pad and polished with 3m rubbing compound until no scratches remained.
4. changed to a black pad and polished with meg's plastX to improve the clarity.
Before:
http://i1.tinypic.com/6odjswk.jpg
http://i2.tinypic.com/6k6zjux.jpg
After:
http://i11.tinypic.com/6stzs5e.jpg
http://i1.tinypic.com/8admz9c.jpg