New Wheels Inbound and a Coating Dilemma

[Desertnate]

This weekend I ordered a new set of wheels for my GTI, but it wasn't until the order was placed that I realized I might not be prepared to properly protect them. The wheels are OZ Superturismo LM's in the "graphite matte" finish, which is actually more of a satin finish by all accounts and the images I've seen.

I won't have much time before arrival and getting them mounted so ordering a dedicated wheel coating now won't arrive in time, but I do have a couple options available to me and wanted gather some opinions. Here are my options/thoughts using products I have on hand in my garage today:

- CQuartz coating (regular one, not UK): Never applied it before, but I've got a sample sized bottle I received a year ago. It's not big enough to do a vehicle, so this might be the perfect use. Don't know how it will hold up.

- McKee's 37 Paint Coating: Plenty on hand to do the job. I'm not sure how it will hold up to wheel duty, but don't see how it would hurt.

- Collinite 845: Great durable sealant and would probably hold up until I mount the winter wheels later and can apply a proper wheel coating

- Run them naked: Simply keep them clean and apply a proper wheel coating once I pull them off to mount the winter wheels.

If I don't use it on the new wheels, I'll most likely use the CQuartz on my current OEM wheels when I pull them off and demote them to winter duty.

Thanks in advance!

[Mike Phillips]

This weekend I ordered a new set of wheels for my GTI, but it wasn't until the order was placed that I realized I might not be prepared to properly protect them. The wheels are OZ Superturismo LM's in the "graphite matte" finish, which is actually more of a satin finish by all accounts and the images I've seen.

I won't have much time before arrival and getting them mounted so ordering a dedicated wheel coating now won't arrive in time, but I do have a couple options available to me and wanted gather some opinions. Here are my options/thoughts using products I have on hand in my garage today:

- CQuartz coating (regular one, not UK): Never applied it before, but I've got a sample sized bottle I received a year ago. It's not big enough to do a vehicle, so this might be the perfect use. Don't know how it will hold up.

- McKee's 37 Paint Coating: Plenty on hand to do the job. I'm not sure how it will hold up to wheel duty, but don't see how it would hurt.

- Collinite 845: Great durable sealant and would probably hold up until I mount the winter wheels later and can apply a proper wheel coating

- Run them naked: Simply keep them clean and apply a proper wheel coating once I pull them off to mount the winter wheels.

If I don't use it on the new wheels, I'll most likely use the CQuartz on my current OEM wheels when I pull them off and demote them to winter duty.

Thanks in advance!


I'd go with the CQuartz since you have it.


My go-to wheel coating is Gtechniq C5 Wheel Armor.



:)

[shadowman]

I been using Gtech C5 for over 4 years. every time nothing but great results.

[MikeMK7GTI]

I used collinite 845 on my wheels before mounting them in the spring and didn't see very good longevity, especially with the barrells. The wheel face held up for a little while though.
This was on a GTI as well, stock Austin wheels.

Sent from my SM-G925W8 using Autogeekonline mobile app (http://r.tapatalk.com/byo?rid=87407)

[Desertnate]

I'd go with the CQuartz since you have it.


My go-to wheel coating is Gtechniq C5 Wheel Armor.



:)

Thanks, Mike! Do you think the 10ml bottle will be enough to fully cover (barrels and faces) 4x 18 inch wheels?


I been using Gtech C5 for over 4 years. every time nothing but great results.

Wheel Armor is on the top of my list of potential candidates.

Mike, shadowman, or anyone else: How much can you cover with a 15ml bottle of Wheel Armor? One set of wheels? Two?


I used collinite 845 on my wheels before mounting them in the spring and didn't see very good longevity, especially with the barrells. The wheel face held up for a little while though.
This was on a GTI as well, stock Austin wheels.

Sent from my SM-G925W8 using Autogeekonline mobile app (http://r.tapatalk.com/byo?rid=87407)

That was my observation too when I applied it to my current Laguna's. It worked well on the faces (never tried barrels), but didn't hold up very long.

[Mike Phillips]

Thanks, Mike! Do you think the 10ml bottle will be enough to fully cover (barrels and faces) 4x 18 inch wheels?




Apologies for not measuring the amount of product used in the past.

My guess is "yes" since you're supposed to apply a thin coat just like when coating car paint.



:)

[The Guz]

I agree with the above in recommending C5 wheel armour. The 15ml bottle sold here on Autogeek will be enough to get those wheels done. I bought the larger 30ml bottle to do the 17x9's on one of my cars and I have more than half of the bottle.

[Audios S6]

I typically spray on my wheel coatings with an airbrush and use 5-7ml to do a set of 4 front and back. Though that may not help you with a wipe on volume use

[PouncingPanzer]

CQuartz would be my choice. That small bottle should be plenty for the wheels.

We have been installed the C5 on customer's wheels who get the CQuartz package we offer. It's tossed in as a freebie since the vehicle sits overnight. The C5 is a great product. As for how far it goes we typically get about 3 vehicles per bottle. Or 12 wheels. Granted, most of our customers have cars not SUVs, those would obviously consume more product.

[Desertnate]

Thanks again for the information, especially regarding whether I have enough product on hand.

My biggest fear when considering coatings packaged in tiny, single use, bottles is running out before I have the job finished. Not only are they expensive, but they aren't readily available. You can't exactly run to a local store and get more in an emergency! The wheels are 18x7.5 so nothing unusual; the only difference being a slightly higher number of spokes.

I find it interesting that C5 seems to be the clear favorite with no dissenting opinions. That almost never happens around here! I'll keep it on the short list for the next time I need to coat some wheels.

[Klasse Act]

I say coat them, no doubt about it!

I was given a half bottle of Pinnacle BL paint coating a while back and I used it on my new wheels and I applied 3x's since they were sitting in my daughters room, waiting for spring. Since them I've noticed how much easier clean up is and I clean them, with wheels cleaner (usually CG's sticky citrus) atleast once a week. I installed them once the weather broke and even now, cleaning is very easy and they bead up still. I was able to do the entire wheel, barrels included but I was lucky because the tires were on and balanced, so I didn't have to worry about the weights not sticking and falling off, it can and has happened in the past, LOL!