View Full Version : Hydro Blue
Do I need to do a step after polish and before Hydro Blue?
Thanks
Rsurfer
07-02-2017, 12:46 AM
Do I need to do a step after polish and before Hydro Blue?
Thanks
Depends on what polish you are using. Most polishes have oils and need to cleaned before applying a LSP.
I will be using complete polish by Griot's
What do I use?
So anyone think I need to wipe the oils from Griots.
If so...can I use N-914 diluted to panel wipe
cleanmycorolla
07-02-2017, 10:12 AM
So anyone think I need to wipe the oils from Griots.
If so...can I use N-914 diluted to panel wipe
yes and yes
kevincwelch
07-02-2017, 10:57 AM
You can use concentrated N914. I think your best bet, however, is to use a paint prep solution such as Gtechniq Panel Wipe, Gyeon Prep, CarPro Eraser or isopropyl alcohol. The prep solution should be lightly buffed so as to avoid scratching or swirling the paint you just corrected! While the silica sprays will bond to the surface of just about anything, you will get longer life out of the coating if it bonds to bare paint (i.e., the clear coat alone).
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.