A Good One Step Compound & Polish

[HockeyCrazi]

Hey Everyone,

Looking for some advice on buying a good 1-step compound. Something that can cut, and finish down like a polish. Was thinking of something like Sonax Cut & Finish. SONAX Cut & Finish (http://www.autogeek.net/sonax-cut-and-finish.html)

Was looking at the All-In-One's like HD Speed, but I want to be able to put my own sealant on after polishing. I know you can top HD Speed and others, but why have that wax in there if you're just going to top it with something better?

So what's your recommendation for a good product that can cut and finish in 1 step?

Will be working by machine (MT-300) and have cutting/polishing/finishing pads + microfiber cutting/finishing pads.

Thanks Everyone! :buffing:

[Cruzscarwash]

griots fast finish is great, finishes near perfect
megs d300 has also worked out great for me
I have used Sonax and that also had wax ready results

[idriveblackcars]

You could try using those uro-fiber pads from buff and shine. I can't wait to pick some up.

[The Guz]

Hey Everyone,

Looking for some advice on buying a good 1-step compound. Something that can cut, and finish down like a polish. Was thinking of something like Sonax Cut & Finish. SONAX Cut & Finish (http://www.autogeek.net/sonax-cut-and-finish.html)

Was looking at the All-In-One's like HD Speed, but I want to be able to put my own sealant on after polishing. I know you can top HD Speed and others, but why have that wax in there if you're just going to top it with something better?

So what's your recommendation for a good product that can cut and finish in 1 step?

Will be working by machine (MT-300) and have cutting/polishing/finishing pads + microfiber cutting/finishing pads.

Thanks Everyone! :buffing:

Cut & Finish works great. It will suit your needs for a one step compounding polish. Good cut and good finish.

I used it with the Meguiar's burgundy foam discs, Buff & Shine Uro Fiber and Griots boss microfiber pads. Worked with each pad combination. I used it with my Rupes MKII but I don't see an issue with the MT300 and those pad combinations.

[custmsprty]

Or this which finishes down even better:

SONAX EX 04-06 250 ml. (http://www.autogeek.net/sonax-ex-0406-250.html)

[FUNX650]

•What you're asking for is, more
often than not, paint dependent.
-"The Test Spot" will be the key
"determiner".

•Take Meguiar's Ultimate Compound
for an example:
-It's finished down LSP-ready, at least in
my assessment, on most occasions.

-However...there's been a rare occasion
or two where I had to follow it up with a
mild polish for the paint to be at the LSP
ready stage...and I don't call it a deal
breaker based on that factoid.



Bob

[MikeC78]

I like good old FG400. Awesome cut and LSP ready.

[custmsprty]

Hey Everyone,

Looking for some advice on buying a good 1-step compound. Something that can cut, and finish down like a polish. Was thinking of something like Sonax Cut & Finish. SONAX Cut & Finish (http://www.autogeek.net/sonax-cut-and-finish.html)

Was looking at the All-In-One's like HD Speed, but I want to be able to put my own sealant on after polishing. I know you can top HD Speed and others, but why have that wax in there if you're just going to top it with something better?

So what's your recommendation for a good product that can cut and finish in 1 step?

Will be working by machine (MT-300) and have cutting/polishing/finishing pads + microfiber cutting/finishing pads.

Thanks Everyone! :buffing:

https://www.autogeekonline.net/forum/new-car-care-products/105789-new-sonax-cut-finish-extreme-showcar-makeover-removing-holograms-using-flex-3401-a.html

[mwoywod]

My 1-step combinations currently

M100 on a Yellow uro-tec pad
HD Polish+ or Scholl Concepts S30+ on a uro-fiber pad
Boss Fast Correcting Cream on Maroon uro-tec pad
Boss Finishing Sealant on Boss Microfiber pad

[cleanmycorolla]

I like Wolfgang Uber and Wolfgang TSR. Both cut and finish pretty fricking awesome.

[Dr Oldz]

Hate to say but there isn't that "one" product due to different paint systems. Bob hit on this above. Having a few products/pad combos onhand is really the key to reach your desired results via a test spot.

[Mike Honcho]

I like good old FG400. Awesome cut and LSP ready.

My thoughts exactly!


Sent from my iPhone using Autogeekonline mobile app (http://r.tapatalk.com/byo?rid=87407)

[WRAPT C5Z06]

Depends on the paint hardness and/or color.

Scholl Concepts S3 XXL, S20 Black, S30+

S20 Black is the most versatile.

I've tried MANY compounds and polishes. Scholl are the only paint correction liquids I use nowadays.

With that said, AutoGeek doesn't sell them...lol

I probably shouldn't be posting this...


Sent from my iPhone using Tapatalk

[Route246]

Or this which finishes down even better:

SONAX EX 04-06 250 ml. (http://www.autogeek.net/sonax-ex-0406-250.html)

+1. 04-06 dissolves away and you can use it under a wide band of conditions. It is very forgiving in that respect.


Sent from my iPhone using Tapatalk

[mikejames]

Hey Everyone,

Looking for some advice on buying a good 1-step compound. Something that can cut, and finish down like a polish. Was thinking of something like Sonax Cut & Finish. SONAX Cut & Finish (http://www.autogeek.net/sonax-cut-and-finish.html)

Was looking at the All-In-One's like HD Speed, but I want to be able to put my own sealant on after polishing. I know you can top HD Speed and others, but why have that wax in there if you're just going to top it with something better?

So what's your recommendation for a good product that can cut and finish in 1 step?

Will be working by machine (MT-300) and have cutting/polishing/finishing pads + microfiber cutting/finishing pads.

Thanks Everyone! :buffing:

Hd Speed followed by Poxy is one heck of a combo!