lane5515
06-26-2017, 10:02 PM
2015 Dodge Hellcat. Last 2015 off the production line.
Last year I completed a full detail on the owners Corvette. When I completed the Vette he said he wanted his Hellcat done. Well a year later he contacted me and said he was ready. There’s nothing better than repeat customers who trust you with their $70,000 cars. The owner wanted the full complement of services for the exterior.
The overall condition of the Hellcat was pretty good. The owner said it had been hand washed 4 times over the past two years. He thought it could be brought to another level, which is a lot harder to do with a car in good condition compared to a swirled out mess.
I started this project with the Tires, Wheels and Wells
The tires were cleaned with Shine Supply Wise Guy 1:3 and Tuff Shine Brush.
Wheels were done with M37 Wheel Cleaner, Wheel Woolies and CP IncrediFlair Mitt.
Wells cleaned with Shine Supply Wise Guy 1:3 and various brushes.
Tires were dressed with Opti-Bond 1:1 and Wheels sealed with CP Hydr02.
Before
https://www.autogeekonline.net/gallery/data/3475/medium/HC1.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC4.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC2.JPG
Cleaning
https://www.autogeekonline.net/gallery/data/3475/medium/HC5.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC8.JPG
After
https://www.autogeekonline.net/gallery/data/3475/medium/HC20.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC41.JPG
Next I moved on to washing and decontaminating the paintwork.
Decon
- IronX
- NanoSkin Medium Grade Wash Mitt
Black is tough to see the IronX working but as you can see on the floor it was doing its job.
https://www.autogeekonline.net/gallery/data/3475/medium/HC11.JPG
Wash
I started with foaming the car, letting it dwell a few minutes and rinsing with my power washer.
https://www.autogeekonline.net/gallery/data/3475/medium/HC10.JPG
Next I completed a 2BM with CarPro Reset, Adams Wash Pad, and various brushes. The plastics and emblems were cleaned with M37 APC, various brushes, toothpicks and qtips.
Dried with Metro Master Blaster and GG PFM Towel
The black hood vents were removed, cleaned and later sprayed with M37 Trim Detailer.
Polishing
The paint was in pretty good condition. Only some minor scratches from hand washes and drying with a chamois. I talked to the owner about using a MF drying towel instead of a chamois when I dropped it off.
A couple before pics showing the type of scratches that were found all around the car.
https://www.autogeekonline.net/gallery/data/3475/medium/HC13.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC12.JPG
The metallic flake made taking pics of the scratches difficult. I guess that is a good thing though!
After doing some test spots I found CarPro Essence with a yellow rupes pad gave me great results with only one polishing step needed.
Polishers used
- GG Boss 21
- Flex 3401
- Rupes Mini
- Rupes IBrid
LSP
- CQuartz Coating
- Topped with Reload
All hard plastics were treated with WETS
Interior
- Wiped down, vacuumed, glass cleaned. Hard plastics received WG Vinyl and Rubber Protectant.
https://www.autogeekonline.net/gallery/data/3475/medium/HC19.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC18.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC15.JPG
Finished Pics – as you can see in the reflections it was cloudy outside. When the sun did peek out for a moment the metallic flake really popped!
https://www.autogeekonline.net/gallery/data/3475/medium/HC21.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC23.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC29.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC28.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC34.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC35.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC30.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC27.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC38.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC25.JPG
Thanks for looking! All comments and criticism is appreciated.
Last year I completed a full detail on the owners Corvette. When I completed the Vette he said he wanted his Hellcat done. Well a year later he contacted me and said he was ready. There’s nothing better than repeat customers who trust you with their $70,000 cars. The owner wanted the full complement of services for the exterior.
The overall condition of the Hellcat was pretty good. The owner said it had been hand washed 4 times over the past two years. He thought it could be brought to another level, which is a lot harder to do with a car in good condition compared to a swirled out mess.
I started this project with the Tires, Wheels and Wells
The tires were cleaned with Shine Supply Wise Guy 1:3 and Tuff Shine Brush.
Wheels were done with M37 Wheel Cleaner, Wheel Woolies and CP IncrediFlair Mitt.
Wells cleaned with Shine Supply Wise Guy 1:3 and various brushes.
Tires were dressed with Opti-Bond 1:1 and Wheels sealed with CP Hydr02.
Before
https://www.autogeekonline.net/gallery/data/3475/medium/HC1.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC4.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC2.JPG
Cleaning
https://www.autogeekonline.net/gallery/data/3475/medium/HC5.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC8.JPG
After
https://www.autogeekonline.net/gallery/data/3475/medium/HC20.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC41.JPG
Next I moved on to washing and decontaminating the paintwork.
Decon
- IronX
- NanoSkin Medium Grade Wash Mitt
Black is tough to see the IronX working but as you can see on the floor it was doing its job.
https://www.autogeekonline.net/gallery/data/3475/medium/HC11.JPG
Wash
I started with foaming the car, letting it dwell a few minutes and rinsing with my power washer.
https://www.autogeekonline.net/gallery/data/3475/medium/HC10.JPG
Next I completed a 2BM with CarPro Reset, Adams Wash Pad, and various brushes. The plastics and emblems were cleaned with M37 APC, various brushes, toothpicks and qtips.
Dried with Metro Master Blaster and GG PFM Towel
The black hood vents were removed, cleaned and later sprayed with M37 Trim Detailer.
Polishing
The paint was in pretty good condition. Only some minor scratches from hand washes and drying with a chamois. I talked to the owner about using a MF drying towel instead of a chamois when I dropped it off.
A couple before pics showing the type of scratches that were found all around the car.
https://www.autogeekonline.net/gallery/data/3475/medium/HC13.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC12.JPG
The metallic flake made taking pics of the scratches difficult. I guess that is a good thing though!
After doing some test spots I found CarPro Essence with a yellow rupes pad gave me great results with only one polishing step needed.
Polishers used
- GG Boss 21
- Flex 3401
- Rupes Mini
- Rupes IBrid
LSP
- CQuartz Coating
- Topped with Reload
All hard plastics were treated with WETS
Interior
- Wiped down, vacuumed, glass cleaned. Hard plastics received WG Vinyl and Rubber Protectant.
https://www.autogeekonline.net/gallery/data/3475/medium/HC19.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC18.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC15.JPG
Finished Pics – as you can see in the reflections it was cloudy outside. When the sun did peek out for a moment the metallic flake really popped!
https://www.autogeekonline.net/gallery/data/3475/medium/HC21.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC23.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC29.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC28.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC34.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC35.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC30.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC27.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC38.JPG
https://www.autogeekonline.net/gallery/data/3475/medium/HC25.JPG
Thanks for looking! All comments and criticism is appreciated.