Compounding specific parts of the car only

[opher50]

Hey fellas,

Been following this forum for a while and finally in need for some advice.
I own a dark red (bordeaux) car and I've noticed that while the car looks pretty good, the bonnet is in a worse state compared to the other car parts. Now I was wondering if compounding only the bonnet would look weird?
I did do AIO with auto finnesse tripple on the entire car but the bonnet needs further correction..

What are your suggestions?

Thanks :)

[Widget]

Assuming the rest of the car is already polished up and free of noticable defects, I honestly can't see it looking weird. Unless you polished only the bonnet to a super high gloss, should be ok. (imo)

[opher50]

Rest of the car is pretty much free of notable defects..
I am going to use meg's UC by hand with orange hexagon cutting pad.. Hoping to see so e good results

[Widget]

Rest of the car is pretty much free of notable defects..
I am going to use meg's UC by hand with orange hexagon cutting pad.. Hoping to see so e good results

Why by hand and not machine?

[opher50]

Don't have the facilities...

[TMQ]

Sure you can!

Just remember if you compound, follow up with a polish and then your wax
or
Just polish and then follow up with a wax.

Tom



Tom

[opher50]

Great! Thanks for the comments.
Will auto finnesse tripple be enough as a Polish / wax? It contains light Polish abrasives and wax with some carnauba percent.