Need help with my Shelby GT500

[patricemougeot]

I don't know why i'm getting these spots after I used the Flex PE 14-2 150 with the 3" cyan Lake Country hydtotech pads and the Griot's correcting cream. Can someone help me?5727857279572805728157282

Sent from my Nexus 6 using Autogeekonline mobile app (http://r.tapatalk.com/byo?rid=87407)

[Marc08EX]

Are the white spots on your bumper the exact same diameter as the blue foam pad?

How did you use the rotary? Did you just stay in that spot?

[rlmccarty2000]

Looks like you burned the clear coat or at the least hazed it badly. A 3 inch pad on a rotary will do that.

[LSNAutoDetailing]

Looks like you burned the clear coat or at the least hazed it badly. A 3 inch pad on a rotary will do that.

Pictures are hard to tell what is going on. But the plastic cannot dissipate the heat like sheet metal. It's very, very, very, very easy to burn paint on a bumper cover. I tell customers, don't expect getting scratches out... Better using a filler wax to conceal than try to remove.

On the bight side, a bumper cover is easy to fix... Especially a Mustang. Pop it off and bring it to your body shop and have them fix any existing blems, then do a respray on it.

[patricemougeot]

Are the white spots on your bumper the exact same diameter as the blue foam pad?

How did you use the rotary? Did you just stay in that spot?
No the big white spot is my light. And no I did not stay in the same spot. This is a rotary polisher not a da.

Sent from my Nexus 6 using Autogeekonline mobile app (http://r.tapatalk.com/byo?rid=87407)

[ZiggyPopp]

Were those spots there before you started and what you are trying to get out? They look like bad water marks or other corrosive damage to me. If so, I would use a DA with micro fiber pad and *MILD* non diminishing polish like M205. Apologies if you are skilled with the rotary as it would be the pro tool of choice. I have the PE14 too and use it only for final jeweling with Menzerna 3800. For everything else, I use a Rupes/Flex DA.





Sent from my iPhone using Tapatalk

[Marc08EX]

No the big white spot is my light. And no I did not stay in the same spot. This is a rotary polisher not a da.

Sent from my Nexus 6 using Autogeekonline mobile app (http://r.tapatalk.com/byo?rid=87407)

I know you were using a rotary. I know what the PE-14 is. The reason I ask if you stayed in one spot is because you can easily burn through the clear coat when using a rotary. Even more so if you don't move the polisher around.

I'm just trying to help you out man. If the white spots are your light then I don't know what "spots" you're talking about.

[patricemougeot]

Hey Marc. I know you are trying to help me, I appreciate it don't get me wrong. It's the little white spots around the big light. The white spots are not the same as the pad. The big one is my flashlight to see better. And I know not to stay at the same place with a rotary because of the heat it generates. I saw multiple videos from Mike stating that when using a rotary polisher to always keep moving it because if you don't, you will burn through the paint. The thing I don't understand is I used on the top portion of the bumper where you see the head light from one end of the car to the other and it did not do that. Am I going crazy here??

[LSNAutoDetailing]

Have you considered the fact that the little white spots may be pitting, or pitting with product stuck in them (I'm assuming the polish you used was white?). How many miles are on the vehicle? Do you have PPF (Paint Film Protection such as clear bra or Expel) on the front? Have you tried using Erasure or a rinseless/no-rinse wash solution to wipe down the bumper cover and remove any of the polish residue or polishing oils?

I know you said Shelby GT, but you didn't say what year, how many miles, and what type of driving conditions. Any vehicle (especially black) will show pitting in the front bumper cover after accumulating miles on it.

One factor that comes up a lot is after someone takes the time to polish a panel, and removes years of swirls and scratches, it reveals things not visible before.
If it's solvent popping or pitting, there isn't much polishing will do.

Taking a second look at your bumper cover, it would appear that it has some amount of mileage or road rash.

Here is an example of some repair work I did on a black bumper cover with 140K miles on it:

https://cache.nebula.phx3.secureserver.net/obj/NDMyMDBENDRBMDdEQzFGODRDQUY6YzIwMzY2NTc5NDMyYzIxMT E5NmYzYWE1MmU5M2NjNGM=?uid=a6811290-09b7-4bce-a96f-6f678fa609ad

Here is the same spot after a wet-sand with 3000, DA with 105 followed by 205. There is still pitting but not as much:

https://cache.nebula.phx3.secureserver.net/obj/NDMyMDBENDRBMDdEQzFGODRDQUY6ODlkYzNjNWVlZWQzYzhkYz E0OTIwYjQyM2MyY2UxNjA=?uid=04f2d245-6115-4ce4-9374-91dd03cd4bd8

I used the squeegee method of Dr. Color Chip mainly to "fill" the pitting.

At the end of the day, the repair I mention was an enormous job and the bumper cover wasn't as intricate as your Mustang. It was very time consuming, but the alternative was to take it to a body shop. In the future, it not something I'll ever do again, and just let the body shop fill and respray.

Better pictures properly uploaded to the free AGO gallery and posted in the thread may help your cause.
https://www.autogeekonline.net/forum/tips-techniques-how-articles-interacting-discussion-forums/21320-how-work-pictures-discussion-forums.html

[patricemougeot]

Hi LSN. It's a GT500 2011 with 53,000km on it. Never seen winter.

The correcting compound is white. I do not have PPF on the vehicle at all.

I haven't tried using a rinseless wash solution. I will try that tonight and see what happens.

Sent from my Nexus 6 using Autogeekonline mobile app (http://r.tapatalk.com/byo?rid=87407)

[oneheadlite]

I'm with LSN - My first though was pitting from debris impacts on the front of the car. As mentioned, they can become more pronounced when you have less other imperfections to catch your eye or when they retain some of your polish.

[patricemougeot]

I'm with LSN - My first though was pitting from debris impacts on the front of the car. As mentioned, they can become more pronounced when you have less other imperfections to catch your eye or when they retain some of your polish.
Found the issue. It's normal road wear with rock chips. Oh well, either I dr. Color chip it, or I will ask my body shop friend to paint it. Thanks everyone for your input.

Sent from my Nexus 6 using Autogeekonline mobile app (http://r.tapatalk.com/byo?rid=87407)