Opti
05-07-2017, 03:41 PM
I Gloss coated my friends Honda Civic last year and now his older brother got a brand new BMW M1 series in estoril blue. He wanted me to protect it like I did his brothers Honda. So again here I come to the rescue.
Like mentioned the car was brand spanking new so when it arrived it looked great which was good for me as I didnt have much to do.
The car upon arival
http://i.imgur.com/pjLRNl1h.jpg
http://i.imgur.com/jrHKOpwh.jpg
http://i.imgur.com/5SWjhN5h.jpg
http://i.imgur.com/kBlzuLth.jpg
http://i.imgur.com/YqtAFr5h.jpg
http://i.imgur.com/dFXZUxgh.jpg
http://i.imgur.com/AmqF8f1h.jpg
http://i.imgur.com/YbHIAKOh.jpg
The car was fairly clean for a 2 day old...the wheels had some brake dust acumulated and there was some bug splatter in front
http://i.imgur.com/KXeRqOsh.jpg
http://i.imgur.com/DhP8jdjh.jpg
Upon inspection I diddnt find any major damage, just some light swirls that will be removed with polishing. They were most visible on the back lights.
http://i.imgur.com/b7xp5Unh.jpg
I went with the Mike Phillips aggresive wash technique.
So I started with the chemical decon procedure. I used a local iron remover product called Carshinefactory Iron off.
http://i.imgur.com/NwTgLOJh.jpg
Snow foamed and washed usind OPT car wash
http://i.imgur.com/MI9lH6jh.jpg
Foamed again and clayed the paint using a clay mitt.
http://i.imgur.com/ObYRPSUh.jpg
I pulled the car into the garage to dry it and to polish it using OPT Hyper polish and LC orange pad on a DA. 1-2 passes were enough to remove light swirls. I polished the entire car in about 2h (very fast yes I know). I used OPT paint prep to remove polishing oils.
http://i.imgur.com/Q4kkjBmh.jpg
Gloss coat was applied to the majority of the car...
http://i.imgur.com/Qt54Tyrh.jpg
...I said the majority because I ran out of Gloss coat it and had to use Gyeon Cancoat for the back boot and bumper. One coat of Gloss coat and 3 coats of Cancoat on the back 1h apart and left it in the garage over night.
http://i.imgur.com/0F2CBRHh.jpg
The next morning I applied Carpro Reload to help the coating cure for the next couple of weeks.
http://i.imgur.com/WTd5e5Ch.jpg
Fk1000p on the exhaust
http://i.imgur.com/RF3OOHOh.jpg
Gtechiq C2 on the wheels
http://i.imgur.com/ZI4VNlKh.jpg
and TAC system tyre dressing on the tyres
http://i.imgur.com/oIPNNdEh.jpg
The interior was vacuumed and the plastics wiped with OPT opti-clean. The door shuts were polished with OPT poli-seal. The engine bay was wiped with APC and plastics protected with Wolfs chemicals plastic & trim coat.
End results
http://i.imgur.com/43SrIjBh.jpg
http://i.imgur.com/ioXe1XNh.jpg
http://i.imgur.com/MylmWFch.jpg
http://i.imgur.com/qBGKTlhh.jpg
http://i.imgur.com/iOEDRACh.jpg
http://i.imgur.com/Qp6a0zsh.jpg
http://i.imgur.com/xPil8Hzh.jpg
Money shot pictures
http://i.imgur.com/VF8mjfDh.jpg
http://i.imgur.com/J1GN90Rh.jpg
http://i.imgur.com/GIlrVwIh.jpg
http://i.imgur.com/rUXYwEVh.jpg
http://i.imgur.com/WZfDnGjh.jpg
http://i.imgur.com/9PYVvblh.jpg
http://i.imgur.com/OTGizxnh.jpg
http://i.imgur.com/unGNUfbh.jpg
Thats it.
Thanks for watching.
Like mentioned the car was brand spanking new so when it arrived it looked great which was good for me as I didnt have much to do.
The car upon arival
http://i.imgur.com/pjLRNl1h.jpg
http://i.imgur.com/jrHKOpwh.jpg
http://i.imgur.com/5SWjhN5h.jpg
http://i.imgur.com/kBlzuLth.jpg
http://i.imgur.com/YqtAFr5h.jpg
http://i.imgur.com/dFXZUxgh.jpg
http://i.imgur.com/AmqF8f1h.jpg
http://i.imgur.com/YbHIAKOh.jpg
The car was fairly clean for a 2 day old...the wheels had some brake dust acumulated and there was some bug splatter in front
http://i.imgur.com/KXeRqOsh.jpg
http://i.imgur.com/DhP8jdjh.jpg
Upon inspection I diddnt find any major damage, just some light swirls that will be removed with polishing. They were most visible on the back lights.
http://i.imgur.com/b7xp5Unh.jpg
I went with the Mike Phillips aggresive wash technique.
So I started with the chemical decon procedure. I used a local iron remover product called Carshinefactory Iron off.
http://i.imgur.com/NwTgLOJh.jpg
Snow foamed and washed usind OPT car wash
http://i.imgur.com/MI9lH6jh.jpg
Foamed again and clayed the paint using a clay mitt.
http://i.imgur.com/ObYRPSUh.jpg
I pulled the car into the garage to dry it and to polish it using OPT Hyper polish and LC orange pad on a DA. 1-2 passes were enough to remove light swirls. I polished the entire car in about 2h (very fast yes I know). I used OPT paint prep to remove polishing oils.
http://i.imgur.com/Q4kkjBmh.jpg
Gloss coat was applied to the majority of the car...
http://i.imgur.com/Qt54Tyrh.jpg
...I said the majority because I ran out of Gloss coat it and had to use Gyeon Cancoat for the back boot and bumper. One coat of Gloss coat and 3 coats of Cancoat on the back 1h apart and left it in the garage over night.
http://i.imgur.com/0F2CBRHh.jpg
The next morning I applied Carpro Reload to help the coating cure for the next couple of weeks.
http://i.imgur.com/WTd5e5Ch.jpg
Fk1000p on the exhaust
http://i.imgur.com/RF3OOHOh.jpg
Gtechiq C2 on the wheels
http://i.imgur.com/ZI4VNlKh.jpg
and TAC system tyre dressing on the tyres
http://i.imgur.com/oIPNNdEh.jpg
The interior was vacuumed and the plastics wiped with OPT opti-clean. The door shuts were polished with OPT poli-seal. The engine bay was wiped with APC and plastics protected with Wolfs chemicals plastic & trim coat.
End results
http://i.imgur.com/43SrIjBh.jpg
http://i.imgur.com/ioXe1XNh.jpg
http://i.imgur.com/MylmWFch.jpg
http://i.imgur.com/qBGKTlhh.jpg
http://i.imgur.com/iOEDRACh.jpg
http://i.imgur.com/Qp6a0zsh.jpg
http://i.imgur.com/xPil8Hzh.jpg
Money shot pictures
http://i.imgur.com/VF8mjfDh.jpg
http://i.imgur.com/J1GN90Rh.jpg
http://i.imgur.com/GIlrVwIh.jpg
http://i.imgur.com/rUXYwEVh.jpg
http://i.imgur.com/WZfDnGjh.jpg
http://i.imgur.com/9PYVvblh.jpg
http://i.imgur.com/OTGizxnh.jpg
http://i.imgur.com/unGNUfbh.jpg
Thats it.
Thanks for watching.