Question with regard to a statement you made in thread "7424xp & M101"

[robwoodgto]

Hey Mike,

In the following thread you stated that you did not recommend using M205 with M101. Could you please elaborate?

Also, how do I make a post linking to another thread and it show as a title instead of a link?

Thanks,
Ron


https://www.autogeekonline.net/forum/porter-cable-7424xp-dual-action-orbital-polisher/107563-7424-m101.html




Just be sure to do a test spot first and be prepared to do a follow up polishing step to insure no haze left by the compounding step. I would not recommend M205 but take a look at any fine cut polish in the SONAX brand like any of these,



SONAX Cut & Finish (http://www.autogeek.net/sonax-cut-and-finish.html)


SONAX Cut & Finish (http://www.autogeek.net/sonax-cut-and-finish.html)


Sonax Profiline Nano Polish 3/6, sonax nano polish, sonax perfect finish, sonax profiline cut finish (http://www.autogeek.net/sonax-profiline-nano-polish.html)










If you go this route, please post a follow-up as to your results and experience.


Also since this was your first post to the AGO forum...




Welcome to AutogeekOnline!




:welcome:



https://www.autogeekonline.net/forum/porter-cable-7424xp-dual-action-orbital-polisher/107563-7424-m101.html