Mckees paint coating vs gyeon cure vs meguairs ultimate fast finish vs won't name

[Cruzscarwash]

This is a simple side by side of these 4 products. It's my friends car that he never washes...Never, so I'm going to test longevity on all 4 and I'll wash the hood once a month. I'm thinking of just doing a mckees n914 wash each month and then test beading again after that. If you think I should use a different soap let me know

So I washed the hood with megs d114 and then polished with mckees fast compound and then fast polish, 2 eraser wipe downs and then taped.

Left to right
- mckees paint coating
-Meguairs ultimate fast finish
-Gyeon cure
-Wont name (not from AG)



54964


Here's how they look sprayed down

54965549665496754968


Here's a video of the beading

https://youtu.be/frYXZkTEz70


Here is a quick video of me using the air dryer to dry the panel (turn volume down)

https://youtu.be/TfsyLNLGhRg



They all seem to be equal at this point, beading was the same, sheeting was the same and it dried the same. So all that is left is to see how they do in the long run.

Sent from my Pixel using Autogeekonline mobile app (http://r.tapatalk.com/byo?rid=87407)

[392hemi]

Thanks for doing this. Subbd

Stick with the McKees wash since it leaves nothing behind to change behavior.

[FUNX650]

Unless the "Won't Name" product
happens to also be a 'Coating'...
I'll lay odds that the McKee's Paint
Coating will last longer.


Bob

[Cruzscarwash]

It's not a coating it's a sealant but I'm fully expecting mckees to last the longest but will be interested to see if it doesn't for some random reason

Sent from my Pixel using Autogeekonline mobile app (http://r.tapatalk.com/byo?rid=87407)

[BudgetPlan1]

Gyeon seems pretty vague on their claim of CURE durability but I'd hope the actual coating (McKees) outlasts what is generally though of as a topper/booster.

Gyeon claims do make it kinda hard when comparing their durability claim on Cure and Wetcoat

Gyeon Cure
DURABILITY: >6 weeks
SIO2 PERCENTAGE: >5%
CONTACT ANGLE: >80'
PH TOLERANCE: pH 4-9
CONSUMPTION: 30ml/car

Gyeon WetCoat
DURABILITY: up to 12 weeks
SIO₂ PERCENTAGE <5%
CONTACT ANGLE: >90'
CONSUMPTION: 100ml/car

[Cruzscarwash]

I really like mckees a lot but the only think I don't like is the beading , and I know the beading is not important but tight beading is what my clients want and expect so I normally put a sealant over it to give them that. I think I only have one client who actually listens when I say beading is not as important as they thing it is

[FUNX650]

I really like mckees a lot but the only
think I don't like is the beading , and
I know the beading is not important
but tight beading is what my clients
want and expect so I normally put a
sealant over it to give them that.


As long as they pay you for both the
Sealant; and the Coating (including all
of the paint prep that entails)...


Bob

[Audios S6]

I'm in the midst of testing cure and the nameless spray along with several others. As I recall from the last inspection, cure and nameless are both holding up about the same. One other nameless is blowing everything out of the water with durability, but application is horrid, especially as it gets colder. I'll try to remember to PM you the current standings.

[Cruzscarwash]

I'm in the midst of testing cure and the nameless spray along with several others. As I recall from the last inspection, cure and nameless are both holding up about the same. One other nameless is blowing everything out of the water with durability, but application is horrid, especially as it gets colder. I'll try to remember to PM you the current standings.

yeah let me know what you are running, im always open to try out new things

[Sizzle Chest]

Great durability test! I'm in for the long haul on this one...thanks for doing it!

[Cruzscarwash]

I know it's only been a few days but it rained. U can see the tape lines549815498254983

Sent from my Pixel using Autogeekonline mobile app (http://r.tapatalk.com/byo?rid=87407)

[Cruzscarwash]

here's the latest and greatest



https://youtu.be/kMtkuvIpKn0

[glfnaz]

Thanks for doing this Cruz!

[Kevin845]

Thanks for the review, look forward to the longevity test. Since I haven't used any of these products yet, what was the sure time for each product prior to the water beading test?

[Cruzscarwash]

I think it was only an hr between application and first water test