View Full Version : Can I add Black Light over HD Speed?
Bill220
01-22-2017, 02:08 PM
Or won't it stick? I have a pile of it I want use up.
Thanks!
Bill
FUNX650
01-22-2017, 03:47 PM
Re: Can I add Black Light over HD Speed?
IMO: Yes you can.
Or won't it stick?
Please see below posting:
"Originally Posted by Mosca
I've never walked out into a garage
only to find out that overnight the
wax or paint sealant I applied slipped
off the car's paint and piled-up on the
floor surrounding the car because it
didn't bond or stick to the paint."
Bob
Bill220
01-22-2017, 05:06 PM
LOL, thanks! I have to go over it with Dr. Color Chip so I'll be removing the HD Speed sealant in those areas and then I figured I'd use the Black Light. That HD speed is pretty good stuff. I'd upload some pictures but I can't figure it out.
DaveT435
01-22-2017, 05:56 PM
LOL, thanks! I have to go over it with Dr. Color Chip so I'll be removing the HD Speed sealant in those areas and then I figured I'd use the Black Light. That HD speed is pretty good stuff. I'd upload some pictures but I can't figure it out.
You may remove the rest of the Speed as well, I'm pretty sure, not positive, Blacklight has some abrasives in it. I really like the look of Blacklight.
Bill220
01-22-2017, 06:36 PM
I use a grey pad to apply the black light but I want to get the chips filled first. There's not a lot of them. I'm very OCD. VERY.
MikeC78
01-22-2017, 06:50 PM
Why would you want add blacklight over Speed? To me that makes no sense. if you need to add blacklight over speed, you're not appling Speed correctly.
Bill220
01-22-2017, 06:53 PM
Because I have to strip the speed in certain areas to fix chips with Dr. Color Chip. Plus I don't know how long the Speed will last.
MikeC78
01-22-2017, 06:55 PM
Speed will outlast blacklight any day of the week, and twice on Sunday. Blacklight is for a short visual appeal, nothing else. You'd also be counterproductive and wasting your time.
Bill220
01-22-2017, 06:57 PM
Thank you! I'll just reapply the Speed to the stripped areas. It made my car look awesome! If I knew how to upload photos I'd show you.
MikeC78
01-22-2017, 06:58 PM
Just strip the area you're gonna colorchip. Wait until it cures, then Speed.... If you're gonna top anything on Speed, I'd use Poxy.
Jeremy1976
01-22-2017, 07:21 PM
No. Glaze then wax or sealant. Black Light is a gloss enhancer or what I consider a glaze.
Bill220
01-22-2017, 07:51 PM
I will reapply Speed to the stripped areas then use Lava. I want to use up the stuff I have before I buy anything new.
custmsprty
01-22-2017, 08:52 PM
Thank you! I'll just reapply the Speed to the stripped areas. It made my car look awesome! If I knew how to upload photos I'd show you.
If you want awesome top off Speed with Poxy and you will get months of protection and amazing shine.
http://www.autogeekonline.net/forum/show-n-shine/91677-2015-bmw-435i-meets-hd-speed-hd-poxy.html
FUNX650
01-22-2017, 11:58 PM
I will reapply Speed to the stripped areas
then use Lava.
I want to use up the stuff I have
before I buy anything new.
Lava?!?!
What happened to you wanting to
use up your pile of BL?
Re: Can I add Black Light over HD Speed?
Or won't it stick?
I have a pile of it I want use up.
Thanks!
Bill
{HARRUMPH...forget about what
I posted beforehand...LOL!}
Bob
Bill220
01-23-2017, 01:15 AM
This stuff is awesome. My car has never looked better.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.