PDA

View Full Version : Flex 3401 4 3/8" backing plate


Pages : [1] 2
ncgolfguy
11-28-2016, 02:06 PM
OK I got 4 3/8" backing plate for my flex. What size pads should I use to with it? Thanks
Harry Da Hamster
11-28-2016, 02:55 PM
5"
ncgolfguy
11-28-2016, 06:06 PM
Yeah I was thinking 5 1/2 maybe a little too big
dlc95
11-28-2016, 06:10 PM
Yeah I was thinking 5 1/2 maybe a little too big

Those will work too.
Harry Da Hamster
11-28-2016, 08:02 PM
It's not a science. As long as the pad is well supported, then it's fine.
CarolinasFinestDetailing
11-28-2016, 08:26 PM
I use 5.5 pads with mine. No problemo!
Dandy98
11-28-2016, 08:55 PM
There is a balance factor here as well. Too large of a finishing pad on a small backing plate could be an issue. But if Carolinas Finest states no problem then it's probably worth trying out. If you have ever had a tire out of balance you know what I mean. You may feel it. Also as noted above please see that you have it centered properly.
VISITOR
11-28-2016, 09:20 PM
if you use 5.5" pads you'll have a little safety margin as the backing plate is a little smaller than the 5" velcro on the pad...
http://lib.store.yahoo.net/lib/autogeek/flex-xc3401-mini-backing-plate.gif
Zubair
11-29-2016, 12:36 AM
Its the best bp on the Flex, I use it will all types of 5.5" pads.
Mike Phillips
11-29-2016, 08:08 AM
Just to note....

There's not a lot of 5" pad options. Actually... I can't think of any.

There are a LOT of 5.5" pad options.


As long as you center the 5" velcro backing on the 4 3/8" backing plate the tool and pad will buff paint all day long.


:)
Cruzscarwash
11-29-2016, 08:19 AM
Yes just as Mike said, center the pad up and you will be on your way. Love my flex with the 5.5 pads.

Sent from my Pixel using Tapatalk
ncgolfguy
11-29-2016, 12:23 PM
Awesome thanks for all the help!
ncgolfguy
11-29-2016, 06:06 PM
Should I get the lake country Thin pads or the lake country flat pads to use with my flex? I already have a set of the lake country ccs 6 1/2" pads.
ncgolfguy
11-29-2016, 06:07 PM
BTW I am going to be using it on 2015 black Tahoe that needs compound polish and wax.
WaxMaster1
11-29-2016, 09:02 PM
Just to note....

There's not a lot of 5" pad options. Actually... I can't think of any.

There are a LOT of 5.5" pad options.


As long as you center the 5" velcro backing on the 4 3/8" backing plate the tool and pad will buff paint all day long.


:)

Mike, aren't these the premiere 5" pads for the Flex? They're all I use because of this forum.

Lake Country Hybrid Power Finish 5 Inch Foam Pads (http://www.autogeek.net/5-inch-hybrid-pads.html)