PDA

View Full Version : How to?



leonm47
11-22-2016, 05:08 PM
I have a 2016 B5 Blue Dodge Charger Scat Pack. I had the dealer install hood and trunk stripes. They are covered with swirls and hard as hell to remove. I've tried detail spray, wax and etc. What would be the best method to get rid of these? One can put moisture on your thumbs and they will come off but other ways not so.

osiapstndp
11-22-2016, 05:20 PM
Can you post pictures? Are the stripes matte or glossy? Are they OEM rally stripes that are common on SRT models, or are they aftermarket?

GSKR
11-22-2016, 05:21 PM
Are they mat looking or have a semi gloss to them? What tools do you have?

Eldorado2k
11-22-2016, 05:22 PM
Are they matt or glossy?


Sent from my iPhone

GSKR
11-22-2016, 05:24 PM
Who put the swirls in it? If they did it you want new ones for free.

leonm47
11-23-2016, 01:14 PM
OK the stripes are Matte. They were installed by the dealer so I would presume they are aftermarket. I do know the guy that installed them had his own business. The swirls didn't appear until after the first few washings.

leonm47
11-23-2016, 05:32 PM
Can you post pictures? Are the stripes matte or glossy? Are they OEM rally stripes that are common on SRT models, or are they aftermarket?

OK not computer literate. I took photo's but don't know to upload to the post.

The Guz
11-23-2016, 05:46 PM
Upload them into your gallery and then post them on here

TTQ B4U
11-23-2016, 06:59 PM
OK not computer literate. I took photo's but don't know to upload to the post.

Create a photobucket account and upload them there. This will allow for larger sizes to be displayed. I would try Wolfgang Exterior Trim Sealant aka WETS. When you wipe it on it will appear glossy or wet but let it soak in and then wipe it off after about 10 minutes blending it nicely with a MF Rag. It will go a long way at hiding any imperfections and help seal the stripes from fading and the elements too. I use it quite a bit. You may need to treat the car 2-3 times over the next month or so but you'll find that after that it will peak in it's effectiveness and then you will no longer need to apply it so often.

I did the matt-finished vinyl wrapped hood on this 1LE Camaro and it looks great. It too had swirls and some scratches but they are all but gone.


http://i1379.photobucket.com/albums/ah133/PDQS4/Misc%20Detailing/20161111_220853%20web_zpsdzerthyg.jpg (http://s1379.photobucket.com/user/PDQS4/media/Misc%20Detailing/20161111_220853%20web_zpsdzerthyg.jpg.html)

http://i1379.photobucket.com/albums/ah133/PDQS4/Misc%20Detailing/20161112_090432%20web_zpsawylvuej.jpg (http://s1379.photobucket.com/user/PDQS4/media/Misc%20Detailing/20161112_090432%20web_zpsawylvuej.jpg.html)

DaveT435
11-23-2016, 07:22 PM
Do you have any swirls in the paint?

coles_paint_correction
11-23-2016, 09:29 PM
Yeah if you can get to uploading some pictures, i'm sure a few members will chip in on some help.
I have seen of correcting matte paint believe it or not.