Mike Phillips
11-16-2016, 03:53 PM
The FINISHER - Updated FLEX XFE7 15mm Orbital Polisher (http://www.autogeekonline.net/forum/ask-mike-phillips-your-detailing-questions/106337-finisher-updated-flex-xfe7-15mm-orbital-polisher.html)
First a big thank you to Bob Eichelberg at FLEX Power Tools North America!
While we we're at the 2016 SEMA show in Las Vegas, Bob Eichelberg gave me one of the updated FLEX XFE7 15mm Orbital Polishers aka
The Finisher!
http://www.autogeekonline.net/gallery/data/3264/Updated_FLEX_XFE7_001.jpg
One of the improvements to the updated design is to close-off the upper cooling vents.
http://www.autogeekonline.net/gallery/data/3264/Updated_FLEX_XFE7_002.jpg
The other update is the addition of cooling vents built into the backing plate.
http://www.autogeekonline.net/gallery/data/3264/Updated_FLEX_XFE7_003.jpg
This particular unit is the #54 Production Unit, which will go into my collection of prototype and low number production tools.
http://www.autogeekonline.net/gallery/data/3264/Updated_FLEX_XFE7_004.jpg
http://www.autogeekonline.net/gallery/data/3264/Updated_FLEX_XFE7_005.jpg
Here's a few pictures showing the factory installed 6" backing plate on the left and the optional 5" backing plate on the right.
http://www.autogeekonline.net/gallery/data/3264/Updated_FLEX_XFE7_006.jpg
http://www.autogeekonline.net/gallery/data/3264/Updated_FLEX_XFE7_007.jpg
http://www.autogeekonline.net/gallery/data/3264/Updated_FLEX_XFE7_008.jpg
On Autogeek.com
The FLEX XFE7 is expected to be here at our Stuart, Florida warehouse in time for Christmas. You can pre-order now if you want to make sure you get one before they sell out.
FLEX XFE7-15 Long Stroke Orbital Polisher (http://www.autogeek.net/flex-xfe7-15-orbital-polisher.html) - Pre Order Available!
:)
First a big thank you to Bob Eichelberg at FLEX Power Tools North America!
While we we're at the 2016 SEMA show in Las Vegas, Bob Eichelberg gave me one of the updated FLEX XFE7 15mm Orbital Polishers aka
The Finisher!
http://www.autogeekonline.net/gallery/data/3264/Updated_FLEX_XFE7_001.jpg
One of the improvements to the updated design is to close-off the upper cooling vents.
http://www.autogeekonline.net/gallery/data/3264/Updated_FLEX_XFE7_002.jpg
The other update is the addition of cooling vents built into the backing plate.
http://www.autogeekonline.net/gallery/data/3264/Updated_FLEX_XFE7_003.jpg
This particular unit is the #54 Production Unit, which will go into my collection of prototype and low number production tools.
http://www.autogeekonline.net/gallery/data/3264/Updated_FLEX_XFE7_004.jpg
http://www.autogeekonline.net/gallery/data/3264/Updated_FLEX_XFE7_005.jpg
Here's a few pictures showing the factory installed 6" backing plate on the left and the optional 5" backing plate on the right.
http://www.autogeekonline.net/gallery/data/3264/Updated_FLEX_XFE7_006.jpg
http://www.autogeekonline.net/gallery/data/3264/Updated_FLEX_XFE7_007.jpg
http://www.autogeekonline.net/gallery/data/3264/Updated_FLEX_XFE7_008.jpg
On Autogeek.com
The FLEX XFE7 is expected to be here at our Stuart, Florida warehouse in time for Christmas. You can pre-order now if you want to make sure you get one before they sell out.
FLEX XFE7-15 Long Stroke Orbital Polisher (http://www.autogeek.net/flex-xfe7-15-orbital-polisher.html) - Pre Order Available!
:)