BFWD Consistency

[Sonik1313]

I was wondering if BFWD is supposed to be on the watery side as far as consistency goes. I've tried shaking it like crazy for 5 straight minutes and it always looks like bluish water when it comes out of the bottle. Anyone know if this normal?

[VISITOR]

i've never done it but many have on here, but you can try putting a steel ball bearing inside and then shake it thoroughly...

[Mike@DedicatedPerfection]

I haven't used BFWD but if its anything like DGPS, its normal for it to be on the watery side.

[Zubair]

Normal, both my WGDGPS and BFWD are both on the watery side. Blue watery colour and consistency sounds about right but boy does the finish/result look good on either.

[TTQ B4U]

i've never done it but many have on here, but you can try putting a steel ball bearing inside and then shake it thoroughly...



1 marble would be best as it won't break down over time and contaminate the product.

[Eric@CherryOnTop]

It's normal, it's an oil in water emulsion formula so it's also going to separate rather quickly as you use it. Shake it each time you reapply to the applicator.

[Sonik1313]

Thanks for the responses, I'm gonna try adding a marble to try and mix things up better.

[DasBurninator]

Very runny consistency. One of my favorite sealants though.