View Full Version : BFWD Consistency
Sonik1313
10-31-2016, 12:37 AM
I was wondering if BFWD is supposed to be on the watery side as far as consistency goes. I've tried shaking it like crazy for 5 straight minutes and it always looks like bluish water when it comes out of the bottle. Anyone know if this normal?
VISITOR
10-31-2016, 01:01 AM
i've never done it but many have on here, but you can try putting a steel ball bearing inside and then shake it thoroughly...
Mike@DedicatedPerfection
10-31-2016, 01:59 AM
I haven't used BFWD but if its anything like DGPS, its normal for it to be on the watery side.
Zubair
10-31-2016, 02:22 AM
Normal, both my WGDGPS and BFWD are both on the watery side. Blue watery colour and consistency sounds about right but boy does the finish/result look good on either.
TTQ B4U
10-31-2016, 05:54 AM
i've never done it but many have on here, but you can try putting a steel ball bearing inside and then shake it thoroughly...
1 marble would be best as it won't break down over time and contaminate the product.
Eric@CherryOnTop
10-31-2016, 06:41 AM
It's normal, it's an oil in water emulsion formula so it's also going to separate rather quickly as you use it. Shake it each time you reapply to the applicator.
Sonik1313
10-31-2016, 12:34 PM
Thanks for the responses, I'm gonna try adding a marble to try and mix things up better.
DasBurninator
10-31-2016, 01:03 PM
Very runny consistency. One of my favorite sealants though.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.