Next 3-Day Competition Ready Detail Class - February 17th, 18th, 19th

[Mike Phillips]

Next 3-Day Competition Ready Detail Class - February 17th, 18th, 19th (http://www.autogeekonline.net/forum/information-competition-ready-3-day-detailing-classes-mike-phillips/104347-next-3-day-competition-ready-detail-class-february-17th-18th-19th.html)



http://www.autogeekonline.net/gallery/data/3400/Mike_Phillips_Class_SOLD_OUT1.jpg



Note: Our classes always sell out so once you clear your schedule, get signed up before it's too late. At this time we hold these classes three times a year.


2017 Schedule

February 17th, 18th, 19th - IDA SV Testing will be on Monday, February 20th

May 5th, 6th and 7th - IDA SV Testing will be on Monday, May 8th

September 29th, 30th, October 1st - IDA SV Testing will be on Monday, October 2nd


Price for 3-day class: $1,795.00



Boat Detailing Class
For those interested in taking our boat detailing class, which we only teach one time a year,

Marine 31 Boat Detailing Class - Saturday February 4th, 2017 (http://www.autogeekonline.net/forum/marine-31-boat-detailing-classes/104252-marine-31-boat-detailing-class-february-4th-2017-most-hands-class-available-u-s.html)

Price for 1-day class: $450.00



How to sign up for a class

To sign-up over the phone, call Andre to reserve your seat before the class you want to attend sells out.

1-800-869-3011 x244


You can also sign-up online

Click here to sign-up for the February Competition Ready 3-Day Detailing Class (http://www.autogeek.net/detailing-boot-camp.html)




The Competition Ready 3-Day Detailing Class takes place on a Friday, Saturday and Sunday.


OPTIONAL

If you want to become an IDA Skills Validated Detailer, we give the Skills Validation practical test on Monday following the three day class. You have to have already,

More information about the Skills Validation Testing here,


IDA SV Certification Testing at Autogeek (http://www.autogeekonline.net/forum/information-competition-ready-3-day-detailing-classes-mike-phillips/100246-ida-sv-certification-testing-autogeek.html)



:)

[Mike Phillips]

Class Information


These three day classes go over more tools, techniques and products than any other class available because I want you to be successful in all areas of car detailing. The classes are intense and incredibly hands-on. There is very little sitting time. After teaching detailing classes for 29+ years I know from experience,

People learn best by doing, not sitting in a chair.


So when you attend a detailing class at Autogeek you learn a lot because you do a lot. These classes are very comprehensive and cover everything from A to Z, inside and out and top to bottom.


Friday


Multiple-Step Paint Correction --> Show Car Detailing
Friday's topics focus on multiple tools and techniques from simple paint correction and polishing to the most advanced paint correction procedures.


Cool Cars
Historically I always bring in very special cars for the class to work on including, muscle cars, classics and streetrods. The majority of these cars have modern basecoat/clearcoat paint jobs so everything you learn on these cars carries over to working on any new or modern car. The primary difference is the unique and fun experience of working on typically show cars in dire need of paint restoration.


Entry level to the most advanced tools
We start with entry level tools and progressively work through all tool set to end with the rotary buffer. Each tool set gets it's own car, or cars so everyone gets plenty of hands-on time with each tool set.


Entry level DA Polishers
This class session goes over the proper techniques for how to use entry level dual action polishers like,

Porter Cable 7424XP (http://www.autogeek.net/porter-cable-7424xp.html)
Meguiar's MT300 (http://www.autogeek.net/meguiars-mt300-dual-action-polisher.html)
Meguiar's G110v2 (http://www.autogeek.net/meguiars-dual-action-polisher-g110.html)
Griot's Garage 6" DA (http://www.autogeek.net/new-griots-polisher.html)

Machine polishing starts with these easy to use polishers and then progresses to tools which offer more power and require more advanced techniques to use correctly. This class is a foundational class where we'll cover the basics of machine polishing. This will provide students with a strong foundation for proper machine polishing techniques and as more tools are covered students will build on this foundation.



Cyclo Dual Head Polishers
This class session goes the proper techniques for using the Cyclo Orbital Polisher Model 5 Pro (http://www.autogeek.net/cyclo-5-pro-polisher.html) as well as the Cyclo buffing pads. The Cyclo polisher is unique in that it offers two buffing heads with incredibly smooth, low vibration polishing. The Cyclo is versatile in that you can no only machine polish paint but you can also perform a variety of machine scrubbing procedures simply by attaching one of the four different brush offerings by Cyclo.



Griot's Garage BOSS Paint Polishing System
This class session covers the new Griot's Garage G21 (http://www.autogeek.net/griots-garage-g21-long-throw-polisher.html) and G15 (http://www.autogeek.net/griots-boss-g15-long-throw-polisher.html) long throw orbital polishers as well as the BOSS buffing pads (http://www.autogeek.net/griots-boss-foam-microfiber-pads-6-inch.html) and BOSS compounds, polishes and waxes (http://www.autogeek.net/griots-garage-boss-long-throw-orbital-polisher-system.html).



RUPES Orbital Polishers
This class session goes over the correct techniques for using multiple RUPES tools including,

BigFoot 21 (http://www.autogeek.net/rupes-lhr-21es-big-foot-polisher.html) - includes both the Legacy and the new Mark II
BigFoot 15 (http://www.autogeek.net/rupes-lhr-15es-big-foot-polisher.html) - includes both the Legacy and the new Mark II
Duetto 12 (http://www.autogeek.net/rupes-12e-duetto.html)
Mini 12 (http://www.autogeek.net/rupes-lhr-75e-polisher.html)
TA50 (http://www.autogeek.net/rupes-ta50-air-sander.html)


NEW

Rupes Bigfoot Nano iBrid Short Neck (http://www.autogeek.net/rupes-ibrid-nano-short-neck.html)

Rupes Bigfoot Nano iBrid Long Neck (http://www.autogeek.net/rupes-ibrid-nano-long-neck.html)


Plus the complete RUPES paint polishing system including Rupes pads (http://www.autogeek.net/rupes-foam-pads.html) and products (http://www.autogeek.net/rupes-polishers.html). The RUPES company is one of the most innovative companies in the car detailing world with top notch tools, pads and products.




The Flex 3401 gear-driven orbital polisher
This class session goes over the correct techniques for using the Flex 3401 (http://www.autogeek.net/flex-orbital-polisher.html) dual action polishers. The Flex 3401 offers both forced rotation and forced oscillation making it a beast of a tool. The Flex 3401 is specifically designed to do one thing only and that's polish paint.

If you don't already own a copy of my how to book you can pick up a copy at the class.

How to use the Flex XC3401 VRG Dual Action Orbital Polisher Paperback Book (http://www.autogeek.net/flex-polisher-book.html)



The Flex XCF 7 15mm Long Stroke Free Spinning Orbital Polisher
This is the brand new free spinning long stroke random orbital polisher introduced by Flex at SEMA 2015. Most of the techniques for using other orbital polishers will apply to this new offering by Flex. Students will learn how to mechanically decontaminate, correct, polish and seal using this new orbital polisher from Flex.


For each of the unique tool sets taught on Friday we also cover multiple brands of compounds and polishes including,

SONAX
Meguiar's
Pinnacle
Wolfgang
Menzerna
Mothers
3M
Optimum



Students also learn how to use multiple brands for three different categories of paint protection including,


Car waxes
Synthetic paint sealants
Paint coatings


Students learn how to choose the best product according to the type of car and how it's used with special attention also paid to the owner's wishes. Students will learn how to educate their customer to match their services to the customer and how and when to upsell a coating instead of using a traditional car wax or synthetic paint sealant.


End of day Questions and Answers Session




Friday night catered dinner at 5:00pm

The class is officially over at 4:30pm and at approximately 5:00pm Autogeek will provide dinner served in the Show Car Garage catered by TooJay's. Here is the menu,


Chicken Marsala
Grilled London Broil Sirloin
Mashed Potatoes
Green Beans
Caesar Salad
Rye Bread





Saturday

Production Detailing - The meat and potatoes of the detailing industry
Production detailing inside and out is covered on Saturday including every step from start to finish to turn out a customer pleasing product. For the production detailing class I bring in modern vehicles that represent the type of cars you'll be working on in the real world. Friday is "fun day" learning paint polishing on cool cars but Saturday we dig in and really go to work experiencing what it will really be like to work as a detailer. For Saturday I bring in a selection of passenger cars, work truck, suvs and soccer mom vans.

Whether you're simply taking care of your own personal vehicles or you're detailing for money, it's vital to understand the importance of knowing when to use a multiple-step approach versus a one-step approach for the exterior paint. Besides paint correction we also cover all other aspects of car detailing including interior detailing, engine detailing, wheels and tires, glass, plastic trim restoration and also headlight restoration. I also teach the order to do all these step to save you steps and thus save you energy and time will still maintaining the highest levels of quality to crush your competition.


How to evaluate the customer and match your services to their needs.
How to set-up your service menu to offer 4 detailing packages.
How to evaluate the vehicle and fill out the VIF form.
How to set up your detailing bay for maximum efficiency.
How to make sure your shop is OSHA compliant.
How to set up your shop for personal safety.
Traditional engine detailing.
Cosmetic engine detailing.
Glass polishing.
Headlight correction.
Hand and machine scrubbing tires to prepare rubber for coatings and dressings.
Iron X (http://www.autogeek.net/carpro-iron-x-cleaner.html) to chemically decontaminate painted body panels.
Foam guns (http://www.autogeek.net/auhagafogun.html) and two bucket method (http://www.autogeek.net/grit-guard-wash-system.html) for washing cars.
Nanoskin Wash Mitts and Towels (http://www.autogeek.net/nanoskin-car-care-products.html) to mechanically decontaminate paint.
Dupray Hill Injection Steam Cleaner (http://www.autogeek.net/dupray-hill-injection-steam-cleaner.html) to steam cleaning interiors.
Mytee HP60 Spyder (http://www.autogeek.net/mytee-hp60-spyder-carpet-extractor.html) & Mytee Lite II 8070 (http://www.autogeek.net/mytee-hot-water-extractor.html) to extract interiors.
One-step exterior production detailing - Learning the correct way to use an AIO or Cleaner/Wax.


End of day Questions and Answers Session




Sunday
First thing Sunday morning we finish up any topics not covered on Friday or Saturday before going into rotary buffers and wet sanding. This includes,

Convertible top cleaning and protection
Students learn proper cleaning and protecting steps for both vinyl and cloth convertible tops.

Tire dressings & coatings
Students learn when to select a tire coating or a tire dressing for their customer's tires plus how and when to upsell a tire coating.

Rock chip and scratch repair
Students learn to use the Dr. Color Chip System for doing touch-up paint repair for scratches and rock chips.


Rotary Buffers
This class session goes over the correct techniques for using rotary buffers to do heavy correction work and polishing and how to finish out hologram free. For this class I tend to bring in large neglected work trucks or passenger cars.

Students have their choice of using,
Flex PE14 (http://www.autogeek.net/flex-pe14-2-150-rotary-polisher.html)
Flex PE8 (http://www.autogeek.net/flex-pe8-compact-rotary-polisher.html)
DeWALT 849X (http://www.autogeek.net/dewalt-dwp849x-polisher.html)
Makita 9237CX2 (http://www.autogeek.net/ma927po.html)
3M Rotary Buffers (http://www.autogeek.net/3m-rotary-polisher.html)


Wet sanding

Students learn what wet sanding is and when to use it. All the various products for both hand sanding and machine sanding are covered.

Wet sanding by hand using Nikken brand finishing papers
Wet sanding by machine using 3M Trizact and Mirka Abralon sanding discs.
How to remove sanding marks using a rotary buffer and polishing swirl free using a dual action polisher.


End of day Questions and Answers Session



Certificate awards ceremony
Each student is awarded their official certificate for attending and completely the class as well as their official Mike Phillips Detailing Boot Camp Class t-shirt.


Wrap-up
The class is wrapped up, any remaining questions are answered and feedback is gathered.


Food and drinks
Each morning fresh donuts and coffee will be available in the classroom.

Lunch is provided and served at noon. There's a water cooler with cups in the garage as well as two vending machines, one with a great selection of cold drinks and the other with a great selection of snacks.


:)

[Blackdevil77]

Nice, I'll see you in February!

[Mike Phillips]

Nice, I'll see you in February!




I'm already working on the cars for that class including a 1957 Chevy Bel Air for the Show Car Detailing session.


:dblthumb2:

[Blackdevil77]

I'm already working on the cars for that class including a 1957 Chevy Bel Air for the Show Car Detailing session.


:dblthumb2:

:drool: :buffing: Can't wait! I love those cars, are we allowed to take pictures?

[Mike Phillips]

:drool: :buffing: Can't wait! I love those cars, are we allowed to take pictures?


Pictures yes. Videos no.


:)

[LEDetailing]

I wish I could come down to Stuart again. I would like to bring my skills up to the next level.

You offer any discounts for those who travel 1,000 plus miles :)


:dblthumb2:

[axel06]

ill be signed up you can count on that !!! saweeeeeeeet!!!!!!

[Mike Phillips]

I wish I could come down to Stuart again. I would like to bring my skills up to the next level.

You offer any discounts for those who travel 1,000 plus miles :)


:dblthumb2:


I know there's a discount for military veterans and for alumni students.


We consistently have people that fly in and drive in from around the world as well as fly in from around the world.


I spoke with two of our past students, Godfrey who was also on our TV show and he's going to send his son to take our class and Brandon who said he's dramatically increased the activity and profits of his shop since taking the class.

Most of these guys don't get on the forum sad to say...


I'm trying to carve out some time to start posting pictures of the cool cars I have lined up for this class...


Stay tuned....


:)

[axel06]

im all signed up ........ cant wait to try the new swirl finder light and the new giots 3 inch backing plate on the gg6

[Mike Phillips]

.


See all the cars for this class here,


Training Cars for the February 2017 Competition Ready Detailing Class! (http://www.autogeekonline.net/forum/information-competition-ready-3-day-detailing-classes-mike-phillips/106984-training-cars-february-2017-competition-ready-detailing-class.html)


Cars start showing up on Wednesday.... class starts on Friday, goes till Sunday.

IDA SV testing on Monday


:)