Question about Menzerna polish

[runrun411]

What's up fellow geeks (AKA my panel of experts).

I started to polish my Honda Pilot to get it ready for the fall/winter. I'm using Menzerna medium cut polish. It seems a little grabby when you go to wipe it off. I haven't use it in a long while so I made sure I shook it up really good. After I wipe it off I spray Menzerna top inspection to get the panel clean. Is the grabby feeling normal with this product?

Thanks.

[Setec Astronomy]

Which one? IP? SIP?

[runrun411]

Sip

[Setec Astronomy]

I've never used that one...sounds like maybe you are going a little heavy with it?

[jkrig]

How long did you work the product, was it by machine or by hand?

[dlc95]

I find that I don't need so much polish with Menzerna. It's hard to say because I haven't used SIP, but I do use PF2500, and that stuff is pretty thick, and easy for me to over apply. I also have to make sure to run it through it's cycle for the easiest wipe off.

[lawrenceSA]

It sounds to me like you are either over applying it, or not working it long enough - you should be looking at roughly 8 decent passes with slow to medium arm speed to allow the polish to properly breakdown.

[Paul A.]

These guys hit on what i was thinking too i.e. maybe too much product used. I also use it more sparingly than other products and work it loooong. There is usually very little to wipe away and mostly the rainbow of oils etc. that are left.