Issues with Buff & Shine Low-Pro's LHR21 MarkII

[richy]

Hmmmm, ok, be interested to know what you discover with them.

Sent from my E6853 using Tapatalk

[VT675]

They're stiff to the point that the outer rim of the pad doesn't seem to be touching the surface of the paint(almost like they don't want to contour the panel) and if I dare go near a slight curve the Rupes freaks out. Sort of like when you're first introduced to the Flex VRG. I bought 3x Green, Orange, Maroon and Red -- so far very disappointed. I've paint corrected close to 150 cars so this isn't my first rodeo. Process is as follows, completely flat panel, prime the pad with 3-4 small dots, gently press the polisher on the panel, start the polisher, as the polisher is starting spread the product for your section, stabilize the polisher and start making section passes. The entire process is not smooth and effortless at all.