View Full Version : How to apply glaze?
AutoApollo
06-02-2016, 12:17 PM
Hi guys, I got some mother's glaze here to go with some mother's carnuaba wax. Do I apply it the same way I would as a wax? I use a da to spread with a red pad.
TTQ B4U
06-02-2016, 12:23 PM
First coat by hand, let cure according to instructions. I usually do two coats but again, cure time is key. First coat can be done with machine but the second I always do by hand.
AutoApollo
06-02-2016, 12:26 PM
First coat by hand, let cure according to instructions. I usually do two coats but again, cure time is key. First coat can be done with machine but the second I always do by hand.
I just did one panel right now. This stuff dries extremely fast. About 30 seconds if not less. Is two coats necessary?
FUNX650
06-02-2016, 01:34 PM
If the Glaze is Mothers California Gold
Micro-Polishing Glaze; and, if I want to
get the "best benefit" out of this product:
I'll apply it using a DA equipped with a
polishing pad.
Bob
custmsprty
06-02-2016, 02:06 PM
Hi guys, I got some mother's glaze here to go with some mother's carnuaba wax. Do I apply it the same way I would as a wax? I use a da to spread with a red pad.
By machine is the way to go, why do it by hand when you can use a machine, just ask Mike Phillips :buffing:
It's virtually impossible to get this kind of full coverage and thin coat by hand. I applied PA Cosmic Coat Sunday with my Rupes Mini on speed 1.
48866
And wipe off was breeze
48867
custmsprty
06-02-2016, 02:07 PM
By machine is the way to go, why do it by hand when you can use a machine, just ask Mike Phillips :buffing:
And one coat is fine, especially if applied by machine. A second coat would be redundant and imho a waste of time and product.
AutoApollo
06-02-2016, 03:19 PM
And one coat is fine, especially if applied by machine. A second coat would be redundant and imho a waste of time and product.
It's settled then. Thank you all
chops1sc
06-02-2016, 04:38 PM
Do you apply the glaze before or after the wax? I have some Menzerna Top Finish machine glaze that I'm dying to try
Sent from my iPhone using Tapatalk
FUNX650
06-02-2016, 04:59 PM
Do you apply the glaze before
or after the wax?
Before.
Bob
chops1sc
06-02-2016, 05:00 PM
Thanks, Bob! Sorry for the minor thread-jack!
Sent from my iPhone using Tapatalk
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.