Megs Paint Reconditioning Cream

[2011 Kona Blue]

Hey guys,
Can I use a cutting MF pad or orange pad with the Megs Paint Reconditioning Cream. Its on a customers vehicle but not doing an extra paint correction.

Normally I would use my green pad but can I use a cutting pad?

[GSKR]

If you are only getting compensated for a one step go for it.

[GSKR]

Hey guys,
Can I use a cutting MF pad or orange pad with the Megs Paint Reconditioning Cream. Its on a customers vehicle but not doing an extra paint correction.
Normally I would use my green pad but can I use a cutting pad?yes

[2011 Kona Blue]

yes

Thanks so much

[Firehouse Mike]

That what I find works best with it!

Mike

[AutowerxDetailing]

If you move from a foam polishing pad to a microfiber cutting pad you will be trading finishing ability for cut. On dark colored paint you may notice DA haze that will require an extra step to clear up.

[2011 Kona Blue]

If you move from a foam polishing pad to a microfiber cutting pad you will be trading finishing ability for cut. On dark colored paint you may notice DA haze that will require an extra step to clear up.

Thanks sir!

[Calendyr]

Since PRC is usually used to both correct and protect, I feel the orange pad is the best solution for using that product. It will give you good cut removing most of the swirl while finishing decently. I cannot comment on MF cutting pads since I don't use them.

[idriveblackcars]

If you move from a foam polishing pad to a microfiber cutting pad you will be trading finishing ability for cut. On dark colored paint you may notice DA haze that will require an extra step to clear up.

Very true. On my own black cars I always use a micro fiber for cutting now, only because I know no matter what I'm going back for a second finishing step. I generally don't waste time with foam cutting pads any longer, they just are not nearly as good

[Eldorado2k]

Megs PRC works great with an Orange Foam Cutting Pad. Better than decent cut and a very underrated shine!

[Zubair]

Megs PRC works great with an Orange Foam Cutting Pad. Better than decent cut and a very underrated shine!

Menzerna 3-1
HD Speed
CarPro Essence
Meguiars D151

All these AIO's seem to favour the general purpose Orange pads which offer a balance of cut and gloss.

[dlc95]

The Lake Country Tangerine Hydrotech also works well with all in one products.

[FUNX650]

Orange foam...:xyxthumbs:


Bob

[2011 Kona Blue]

Thanks guys. If I needed to finish up with say a polish like HD polish, what color pad. MF finishing pad, green, white???

[Eldorado2k]

Thanks guys. If I needed to finish up with say a polish like HD polish, what color pad. MF finishing pad, green, white???

If you need to finish up don't use HD Polish.. Doing so will remove the protection layed down by D151, which in turn will defeat the whole purpose of having used it. If you need to finish up, use the same PRC with a polishing/finishing pad, just as the label suggests.