View Full Version : No beading on vertical panels
frankprozzoly
05-22-2016, 06:13 AM
The beading is great on the flat panels. On this challenger the sides are curved with no interuptions. Is it the shape of the car or am I quickly losing protection
TTQ B4U
05-22-2016, 06:21 AM
what product? mine beads like crazy. Helps with my rinseless as I pre-soak spray side to side top to bottom until the beads start rolling down.
frankprozzoly
05-22-2016, 06:51 AM
I use meguiars 21 and duragloss spray wax and meguiars spray wax sometimes after a rinseless wash
MattPersman
05-22-2016, 08:52 AM
I have had cars in the past do that as well I assumed it was lsp either taking in tons of contamination causing no bead or simply just wore off very quickly. My current vehicle is ok I have a "coating" on it though
Sent from my iPhone using Tapatalk
Hoytman
05-22-2016, 09:21 AM
DG111 beads like crazy...everywhere.
FUNX650
05-22-2016, 09:22 AM
Hi Frank...
Which vertical panels on the
R/T are you talking about? :confused:
I bought myself an expensive bday present today.
I'm nervous about using it for a daily driver.
http://www.autogeekonline.net/forum/attachments/off-topic/41155d1455649003-i-bought-challenger-1455649003164.jpg
{J/K}
•The vertical sides of the car will pick up
more noticeable road/traffic film than the
horizontal surfaces.
-This is often "par for the course" when it
comes to Daily Drivers.
-Less beading when there's traffic film present.
Removal of the traffic film should result in
the return of the previous "water-behavior".
Bob
frankprozzoly
05-22-2016, 10:28 AM
I really haven't paid attention to how it beads after a wash. So I'm sure it's just dirt like your saying
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.