Removing light scratches on ceramic coating

[choijw2]

hi Geeks.

I was wondered if it is okay to do light polish with menzrna sf3800 to remove light swirls on coating system, or is it too aggressive?

Also what is best way to remove coatings?
I recently got into coatings and lots to learn.

[04accord]

I would bet the coating will be compromised after polishing.

[AutoAppeal]

Probably best practice to re-polish and prep the entire panel then re-coat.

[choijw2]

ah so I guess least aggressive polish is still too much for coating.

I think I saw polish specially deigned for ceramic coating but cant remember where I saw it on AG anymore.

[Rsurfer]

ah so I guess least aggressive polish is still too much for coating.

I think I saw polish specially deigned for ceramic coating but cant remember where I saw it on AG anymore.

Could it be "Essence"?

[uhohitsstevo]

I agree with what was said above, do the whole panel and then re coat the panel.

[TTQ B4U]

I agree with what was said above, do the whole panel and then re coat the panel.

^^ this.