New to Forum - Which Flex 3401 VRG Kit?

[AABCDS]

Hey everyone. Just joined the forum today and am looking to purchase a Flex 3401 VRG DA polisher. I was looking at the Flex kits and I was thinking about getting this one with the three Lake Country CCS pads:

FLEX XC3401 VRG Orbital Polisher Kit with Free FLEX Polisher Bag, FLEX Dual Action Polisher and storage bag, FLEX bag kit (http://www.autogeek.net/flex-polisher-kit-bag.html)

1. Which color pads should I get for my three choices? I'll be using it on a 2013 Mini Cooper in pretty good condition, some swirls but nothing major. I was thinking orange, white, and blue.

However, I noticed that Lake Country has new hybrid power finish foam pads and they come highly suggested but I didn't see a Flex kit with these new hybrid pads. Maybe I missed it.

2. Will the CCS pads be enough or should I also get the Lake Country hybrid pads too?
3. If so, which size should I get, 5" or 6.5"?
4. Finally, which colors?

This question has probably been asked and answered dozens of times. If so, please post a link me to that thread and I'll read through it.

Thanks in advance.

- James

There's a picture of my car here:

http://www.autogeekonline.net/forum/introduce-yourself/100989-hello-atlanta.html

[mwoolfso]

I would go with this kit; get the bag separate.

Wolfgang FLEX XC3401 Polishing & Swirl Remover Kit, wolfgang polishes, flex buffer, menzerna, lake country (http://www.autogeek.net/wolfgang-flex-polisher-kit.html)

Order the backing plate kit here as 5 and 4 inch pads will be better for you on this vehicle:

FLEX XC3401 Changeable Backing Plate System (http://www.autogeek.net/flex-xc3401-backing-plates.html)

Order one additional set of 3 pads, 1 cutting pad and 2 more polishing pads (4" in size).

Note that the hybrid and CCS pads work very well for me.

[AABCDS]

Ok. Thanks. I think I'd rather get the free DVD and book in that kit you listed than the free Flex bag.

[David Hayward]

I think lake country is coming out with new pads called force pads. They are thicker and have a cooling hole. I'm waiting to hear back on when autogeek might get them. I would wait for these honestly. It looks like they will work with the flex oem backing plates which would be awesome since I don't care for the interchangeable kit.

[AABCDS]

I think lake country is coming out with new pads called force pads. They are thicker and have a cooling hole. I'm waiting to hear back on when autogeek might get them. I would wait for these honestly. It looks like they will work with the flex oem backing plates which would be awesome since I don't care for the interchangeable kit.

Good info. Thanks.

[David Hayward]

No big deal if you don't wait though. The hybrid pads are still really good on the 3401. I've done tons of vehicles with them. These new force ones I think are to replace the hybrids.