Just ordered my polishing pads!

[uhohitsstevo]

So I bought a GG 6inch DA polisher last week and did some research on pads and such and I just bought a 5inch backing plate for the Lake Country 5.5inch pads I ordered 2 blue, 2 black, 2 white, 2 orange, and 1 yellow. Hopefully I will love these pads and can get some good correcting!

[ViperGuy21]

Which ones did you get? Flat pads? CCS?
I'm looking to get a new set of cutting and polishing pads early this summer myself. I'm good on finishing pads but my cutting and polishing are on their way out

[dlc95]

New pads are always a good reason to be happy!

[uhohitsstevo]

Which ones did you get? Flat pads? CCS?
I'm looking to get a new set of cutting and polishing pads early this summer myself. I'm good on finishing pads but my cutting and polishing are on their way out

I got the flat pads.

[uhohitsstevo]

New pads are always a good reason to be happy!

You like the choice of pads?

[dlc95]

You like the choice of pads?

You can't go wrong with those.

I like to have at least four cutting and polishing pads though. You have a great start!

[Mike@DedicatedPerfection]

Good stuff! Which products will you be combining your setup with? I.e. Compound/Polish/Wax.

[ski2]

Here's an article by Mike regarding the number of pads per step---- http://www.autogeekonline.net/forum/ask-expert-featuring-mike-phillips/88109-how-many-pads-do-i-need-buff-out-my-car.html

[uhohitsstevo]

Good stuff! Which products will you be combining your setup with? I.e. Compound/Polish/Wax.

I am going to using meguiars m105/m205 and then using poor boys black hole w/ wolfgang deep gloss sealant 3.0 on top!

[GSKR]

I got the flat pads.
Good choice.