View Full Version : Roadkill remnants on plastic fender liner
briarpatch
04-24-2016, 08:56 AM
As the title suggests, I have (what I believe to be) roadkill remnants on the plastic fender liners on my Tundra. Nothing I've used so far (Megs APC at 4:1, Greased Lightning) has worked...even when coupled with a fairly stiff brush and a lot of elbow grease. When I dress the fender wells, they 'disappear', but are back by the time the truck gets washed again. Any suggestions? I've thought of trying steam...just haven't gotten there yet.
AGOatemywallet
04-24-2016, 12:10 PM
$5 trim tool from Harbor Freight
Pop the liners off
Have at it
You may get better results by spraying with APC and then laying a damp MF towel on it to increase the dwell time before it evaporates.
Plastic razor blades work well too.
When you are done and 100% clean...coat them with CarPro DLUX. They will stay cleaner and clean up with a damp MF.
If you can't to DLUX...Spray wax them once a month. I prefer Meguiar's Synthetic Express Wax (D156).
briarpatch
04-25-2016, 05:54 AM
thank you....will start with the plastic razor blade and see if that helps
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.