Am I doing something wrong?

[lee250]

So I finally got around to cleaning up the outside of my new car. Don't mind the wheels I'm taking them off tomorrow to clean and seal them.
http://i781.photobucket.com/albums/yy100/toycamry1/20160409_164641-1_zpswkhdpr0s.jpg (http://s781.photobucket.com/user/toycamry1/media/20160409_164641-1_zpswkhdpr0s.jpg.html)

http://i781.photobucket.com/albums/yy100/toycamry1/20160409_164714_zpsf2rv29vo.jpg (http://s781.photobucket.com/user/toycamry1/media/20160409_164714_zpsf2rv29vo.jpg.html)
I washed then clayed with a mother's clay bar kit then used my pc with a white pad and the stage 1 pinnacle xmt polish, wasn't trying to remove much so I figured to go with less cut, then menzerna power lock sealant. My issue was after I used the polish it was difficult to remove some spots, I had to really rub it to get it off, and I had powder from it everywhere. It was warm out but I was in my shop in the shade. I'm new to using any of this stuff. Is this just what happens or did I use to much or just run it too long and it dried out?
http://i781.photobucket.com/albums/yy100/toycamry1/20160410_142401_zpsztkch3ro.jpg (http://s781.photobucket.com/user/toycamry1/media/20160410_142401_zpsztkch3ro.jpg.html)

[lee250]

And how do I clean the sealant out of the pad? Is there anything around the house that can be used?

[cleanmycorolla]

looks like you over use product.

and I use mineral spirits or IPA for sealant in my pads, some sealants however are stubborn and don't want to come out easy!

[lee250]

How do you use them? Pour a little on and scrub it out or fill up something and soak them?

[01civic]

I've had the same issue with using a polish. Will follow along for any tips here. My guess was I worked the product in too much and dried it out.

[Quiksilver5882]

A trick I like to use is M205 one or two drops with a spritz of water. Learned this trick from Kevin Brown. It really helps when you have sticky paint!!


Sent from my iPhone using Tapatalk