- New paint (black), rough to touch, flat
- rust spot
- Whats up Room!
- Water spots
- What's the best way to clear coat on a budget?
- What did I do wrong here? (no gloss on paint)
- Buffing Equipment Purchase
- Hybrid Pads vs. LC Thick Microfiber Pads
- When to say yes to wet sanding
- wet-sanding attempt by previous owner?
- using megs 105
- What's the best way attack this?
- Just Wet Sanded have a bunch of swirl marks.
- wet sanding clear coat failure
- Microfiber cutting and polishing pads
- Can't get rid of remaining swirls
- 1989 Black convertible Vette paint correction
- Swirls after using Mango Breeze Microfiber
- Rich's Flex 3401 + TB Wool Video
- wetsanding
- Most aggressive
- Diminishing vs. Non-Diminishing Abrasives
- Help Removing 400 grit marks
- Sad and polish or sand and respray my orange peel?
- Sonax Profiline Perfect Finish...
- Menzerna SF4000 or Megs M205
- Surbuf vs lake country
- Rust Damage
- Audi paint correction?
- Lake Country Orange pad
- Compare chem guys and menzerna compound/polish
- Help guys !
- Wet Sanding Small Scratch/Nick - 2013 Suburban
- What's needed to sand with the Porter Cable 7424xp
- Help with compound pad choice for 3" Griots Rotary
- new paint job dull
- ceriglass? tool?
- Buffing By Hand... I Can't figure it out!
- Does removing swirls remove cars paint?
- How did I get this scratch?
- Headlight Restoration, 600 grit?
- Noob warning; are these scratches too deep?
- Wetsanding issue?
- Optimum compound on orange pad is not removing swirls
- a few scratches
- First paint burn
- How would I know if I should use compound or swirl remover?
- Dent Guy needing some assistance
- Help with plastic burn
- Need help picking a backing plate