Re: 2018 Class Schedule for Mobile Tech Expo - Friday, January 26th in Orlando, Florida
Re: 2018 Class Schedule for Mobile Tech Expo - Friday, January 26th in Orlando, Florida
Awesome, I checked my schedule and will shoot for the education day! Hopefully I can still register.
Re: 2018 Class Schedule for Mobile Tech Expo - Friday, January 26th in Orlando, Florida
Continued...
Last of the tools from the past...
This first one is a WEN 7" 2-speed Sander/Polisher. These have a 3/8" arbor not the conventional and U.S. standard 5/8" arbor and what this means is there are not any backing plates (that I know of), for these types of old buffers.
http://www.autogeekonline.net/galler.../Tools_097.JPG
http://www.autogeekonline.net/galler.../Tools_098.JPG
This I believe is a GEM Orbital Polisher from GEM Industries.
http://www.autogeekonline.net/galler.../Tools_099.JPG
Interestingly enough, there are no markings on the outside of the above polisher. Nothing, zilch, nada.
The GEM on the left weighs at least 14 pounds. The Chamberlain on the right weighs around 5 pounds.
http://www.autogeekonline.net/galler.../Tools_100.JPG
This will be a fun class, hope to see a LOT of people in the room.
:)
Re: 2018 Class Schedule for Mobile Tech Expo - Friday, January 26th in Orlando, Florida
See you tomorrow Mike! I plan to attend several classes, but we will see if the schedule changes vs. the online schedule. And see you Saturday for the Trade Show part too.
Re: 2018 Class Schedule for Mobile Tech Expo - Friday, January 26th in Orlando, Florida
***Bump***
That time of the year.
Selecting topics for Mobile Tech Expo
Any suggestions?
:)
Re: 2018 Class Schedule for Mobile Tech Expo - Friday, January 26th in Orlando, Florida
Hello Mike,
My suggestion would be for interior reconditioning. Not just limited to carpet extraction. I would love to hear about: odor removal, identifying and treating stains. The different types of modern upholstery and how to handle these. Leather reconditioning, dyeing and repair. Interior coatings , etc.
How does that sound?
Thanks
Alejandro