Thanks: 0
Likes: 0
Dislikes: 0
-
Re: Rupes 5 Inch 2000 & 3000 Grit Sanding Discs
-
Re: Rupes 5 Inch 2000 & 3000 Grit Sanding Discs
Can X Cut foam pads (150 mm) can be used with lower stroke DA Machine than 12 Duetto as I do not have that one.
From Rupes I have LHR 15 Mark II so I was planing to use X Cut Foam pads with Meguiars MT310 which is 8 mm stroke.
Also what machine speed is reccomended for these pads.
Thx
-
Re: Rupes 5 Inch 2000 & 3000 Grit Sanding Discs
Originally Posted by ARTB155
Can X Cut foam pads (150 mm) can be used with lower stroke DA Machine than 12 Duetto as I do not have that one.
First, do you mean the
RUPES X-Cut Foam Sanding Discs
I just need to clarify because you wrote
X Cut foam pads
Without the word RUPES in the front and using the word pads instead of discs, I don't like to assume what you mean.
But if you do in fact mean,
RUPES X-Cut Foam Sanding Discs
Then the answer is YES you can use these foam backed machine sanding discs from RUPES with 8mm Orbital Polishers like the Griot's Garage 6" DA, the Meguiar's MT300 DA and the Porter Cable 7424XP DA.
Originally Posted by ARTB155
From Rupes I have LHR 15 Mark II so I was planing to use X Cut Foam pads with Meguiars MT310 which is 8 mm stroke.
Yes you can use the Meguiar's MT300 to machine sand. Because of the long body it will be a little more awkward and cumbersome to sand with but it will work.
Originally Posted by ARTB155
Also what machine speed is recommended for these pads.
Thx
You need to maintain pad rotation.
So mark your backing plate so your eyes can see pad rotation and then adjust the speed dial as needed to maintain pad rotation.
-
Re: Rupes 5 Inch 2000 & 3000 Grit Sanding Discs
Just add....
I wrote the below article when shortly after Meguiar's introduced their Unigrit discs back in the fall of 2009. My article came out in May of 2010. It's actually the only article I've ever seen on the topic of damp sanding and it is more than in-depth... it's exhaustive.
All the tips and techniques I shared in this how-to article are just as accurate today as when it was written. All the tips and techniques shared in this article appley to ANY brand of sanding disc that is made to be used with water.
Damp-Sanding Tools, Tips and Techniques by Mike Phillips
-
Re: Rupes 5 Inch 2000 & 3000 Grit Sanding Discs
Just out of curiosity....
What are you working on?
-
Re: Rupes 5 Inch 2000 & 3000 Grit Sanding Discs
Mike
Thank you for your reply.
Yes, I mean about Rupes X Cut Sanding Discs not pads (typing error) so you were in right direction.
I am working on a VW Golf 2005. hood as there are lots of scratches causes by the owner when he try to remove some spillage with scotch brite side of dishes sponge together with some dishes abrasive liquid (in my country it is called Arf and it is very abrasive and used for inox dishes washing).
As there is a lot of clear coat (hood was repainted by previous owner) I had plenty of "space" for sanding.
Thx
-
Re: Rupes 5 Inch 2000 & 3000 Grit Sanding Discs
Originally Posted by ARTB155
Mike
Thank you for your reply.
Yes, I mean about Rupes X Cut Sanding Discs not pads (typing error) so you were in right direction.
Check.
Originally Posted by ARTB155
I am working on a VW Golf 2005. hood as there are lots of scratches causes by the owner when he try to remove some spillage with scotch brite side of dishes sponge together with some dishes abrasive liquid (in my country it is called Arf and it is very abrasive and used for inox dishes washing).
As there is a lot of clear coat (hood was repainted by previous owner) I had plenty of "space" for sanding.
Thx
Good to hear... more paint is better when it comes to sanding....
-
Re: Rupes 5 Inch 2000 & 3000 Grit Sanding Discs
Btw. few days ago I received your book about Rupes Polishing System and it is great - probably first in my country Croatia :-)...
Now looking for your other books to add to my collection.
-
Re: Rupes 5 Inch 2000 & 3000 Grit Sanding Discs
Originally Posted by ARTB155
Btw. few days ago I received your book about Rupes Polishing System and it is great - probably first in my country Croatia :-)...
Now looking for your other books to add to my collection.
Thank you!
It takes a lot of thinking work to write a book. It's real easy for everyone to post their opinion on a car detailing topic... try compiling an entire book filled with your opinion and then putting it out on the market for peer review worldwide.
Perhaps consider writing a short testimony and send it to Nick for the Autogeek store. Testimonies help others to decide whether or not to go for it.
Nick@Autogeek.net
-
Re: Rupes 5 Inch 2000 & 3000 Grit Sanding Discs
Done...Nick will soon recive my email...so lets back on topic :-)..
Similar Threads
-
By Mike Phillips in forum How to articles
Replies: 1
Last Post: 11-12-2019, 02:37 PM
-
By Mike Phillips in forum How to articles
Replies: 4
Last Post: 01-08-2019, 09:56 AM
-
By Mike Phillips in forum How to articles
Replies: 11
Last Post: 07-15-2018, 07:51 PM
-
By Mike Phillips in forum How to articles
Replies: 22
Last Post: 02-03-2017, 08:53 AM
-
By kerenzv in forum Ask your detailing questions!
Replies: 14
Last Post: 07-02-2013, 05:38 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks