autogeekonline car wax, car care and auto detailing forum Autogeek on TV
car wax, car care and auto detailing forumAutogeekonline autogeekonline car wax, car care and auto detailing forum HomeForumBlogAutogeek.net StoreDetailing Classes with Mike PhillipsGalleryDetailing How To's
 
Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 4 1234 LastLast
Results 1 to 10 of 31
  1. #1
    Mike Phillips
    Guest

    Buffing CURVED PANELS with NEW RUPES Mark II BigFoot 21 & 15 Polishers

    Buffing curved panels with NEW RUPES Mark II BigFoot 21 & 15 Polishers






    Below you'll find a full picture essay showing the new RUPES BigFoot 21 Mark II and the RUPES BigFoot 15 Mark II in action!

    First however I would like to thank all my friends at RUPES for their trust. I appreciate and value your trust to provide me with your newest evolution in large stroke orbital polishers to test them out here at Autogeek's Show Car Garage.

    Upon finding out I would have access to these new production units I sought out just the right car put these new tools to the test while at the same time a car with a cool factor that any new tool introduction deserves.

    When I first saw Larry Jone's 1951 Mercury Coupe with it's new custom paint job with flames by JoAnn Bortles owner of Crazy Horse Custom Painting I instantly recognized it as the car that Sylvester Stallone, (The Italian Stallion), drove in the movie Cobra.


    Sylvester Stallone - Cobra






    James Dean - Rebel without a cause
    Another famous movie star is also associated with this Mercury coupe. James Dean drove a 1949 Mercury Coupe in the movie which is the same body style as this 1951 Mercury Coupe.







    Besides the cool factor being a car driven by two legendary movie stars and by the way car guys, the 1951 Mercury has a lot of curves so it makes a perfect test car for the new RUPES Mark II series tool.

    Again thank you to everyone at RUPES and especially Chip Case, Todd Helme and Alberto Quiroscabrera for coordinating with me to make this project happen before SEMA.



  2. #2
    Mike Phillips
    Guest

    Re: Buffing CURVED PANELS with NEW RUPES Mark II BigFoot 21 & 15 Polishers

    My take...

    I'm going to share a lot of picture in this thread to really showcase the,

    1. Before condition of the Mercury.
    2. The during shots of this tool in action.
    3. The after shots showing the results.

    Before getting to the pictures however I just want to cut to the chase to share my experience after tackling a very swirled-out paint job.


    Todd and Alberto brought three Mark II polishers, two BigFoot 21s and one BigFoot 15. Since I gravitate towards the BigFoot 21 this is the tool I used for the majority of this project.

    Todd and Alberto when over all the new changes and explained the practical advantages and benefits they provide. I found their information very interesting and Todd has a way of explaining things that makes understanding very easy.

    After discussing the changes we went to work following this process,

    1. Machine decontaminating the paint using RUPES polishers with Nanoskin Autoscrub Pads.

    Performing a Test Spot to dial-in and prove our system approach.

    2. Compounding with Blue/Blue

    3. Polishing with Yellow/Yellow
    (We stopped after machine polishing as I also have a new coating to use and share in an upcoming write-up)


    My experience in one word...

    Impressive

    After Todd did the Test Spot and we all inspected the results I placed a RUPES 7" Coarse Foam Cutting Pad on the RUPES BigFoot 21 Mark II and started compounding the paint.

    Todd and I started on the front of the car as that's where the majority of the curves are found. Pad rotation was dramatically improved both when buffing out curved panels and even when applying firm pressure. The increased performance impressed me and made quick work of removing the holograms from the paint. To be honest... there were convex curved areas that required more focus on my technique to buff completely but this was accomplished simply by adjusting how I held the tool in relationship to the panel.

    Besides the increase in pad rotation and overall power and performance the other aspect that I love about RUPES tools as does everyone else I know and that is the smooth, zero vibration from the tool even after the increases in performance.

    I'm happy to say RUPES has taken their long stroke orbital technology to a new and higher level.


    Now on to the pictures....



  3. #3
    Mike Phillips
    Guest

    Re: Buffing CURVED PANELS with NEW RUPES Mark II BigFoot 21 & 15 Polishers

    Before pictures in full sun.





























    Under florescent lights after chemically stripping the piant
















  4. #4
    Mike Phillips
    Guest

    Re: Buffing CURVED PANELS with NEW RUPES Mark II BigFoot 21 & 15 Polishers

    First up... mechanical decontamination.

    One of the important lessons I teach in all my classes is that gloss comes from a smooth surface.

    After doing the Baggie Test we found the paint was contaminated so we used the Medium Grade Nanoskin Autoscrub Pads on speed setting 1 to mechanically decontaminate the paint.

















  5. #5
    Mike Phillips
    Guest

    Re: Buffing CURVED PANELS with NEW RUPES Mark II BigFoot 21 & 15 Polishers

    The next step is doing a Test Spot.

































    That's what you want to see on paint on a car like this....


  6. #6
    Mike Phillips
    Guest

    Re: Buffing CURVED PANELS with NEW RUPES Mark II BigFoot 21 & 15 Polishers

    Get busy!

    After dialing in our approach it was time to get busy....





    The front clip on the Mercury is very curvy and a great test for the new Mark II series polishers.



































    Here's some more very curvy panels...














    The polishing step
    Alberto has started in on the polishing step while Todd and I tackle the louvers using the RUPES TA50

























  7. #7
    Mike Phillips
    Guest

    Re: Buffing CURVED PANELS with NEW RUPES Mark II BigFoot 21 & 15 Polishers

    Finished
    Couple shots of the tools and pads used...


















  8. #8
    Mike Phillips
    Guest

    Re: Buffing CURVED PANELS with NEW RUPES Mark II BigFoot 21 & 15 Polishers

    Results
    I always have a hard time picking out the best so here's something for everyone...





































































  9. #9
    Mike Phillips
    Guest

    Re: Buffing CURVED PANELS with NEW RUPES Mark II BigFoot 21 & 15 Polishers

    Two new how-to books

    In time for SEMA and Christmas I have two brand new how-to books.


    How to use the RUPES BigFoot Paint Polishing System
    for Production Detailing and Show Car Detailing





    How to Detail Boats with Marine 31
    (Includes RUPES Polishers and Sanders)





    While Todd and Alberto were here they both received signed copies.



















    Thank you Todd and Alberto for spending a day sharing the new RUPES Mark II series polishers with me here at Autogeek's Show Car Garage.

    Again thank you to everyone at RUPES for your trust.

    Looking forward to seeing everyone at SEMA!


  10. #10
    Super Member whavens's Avatar
    Join Date
    Jul 2014
    Location
    Jeffersonville, IN
    Posts
    541
    Post Thanks / Like

    Re: Buffing CURVED PANELS with NEW RUPES Mark II BigFoot 21 & 15 Polishers

    Great thread, Mike. Super job polishing a true classic. Looks like I need to add a new polisher to the arsenal, and a new book. Another home run.

    Walter

    :thumbup:

    Sent from my KFSOWI using Tapatalk
    2009 Volvo S60 2.5T Black 2011 Mini Countryman Oxford Green Metallic

Page 1 of 4 1234 LastLast

Similar Threads

  1. Replies: 10
    Last Post: 11-28-2017, 12:57 PM
  2. Christmas comes early! New RUPES Mark II BigFoot 21 and 15 Polishers
    By Mike Phillips in forum Ask your detailing questions!
    Replies: 15
    Last Post: 11-22-2015, 10:00 PM
  3. Pad size choice for buffing curved panels??
    By rcoops77 in forum Auto Detailing 101
    Replies: 3
    Last Post: 08-13-2015, 03:35 PM
  4. RUPES should make some videos on correcting curved panels...
    By SR99 in forum RUPES BigFoot Oribital Polishers
    Replies: 36
    Last Post: 02-05-2014, 02:03 PM
  5. Video: Orbital Stroke Comparison - RUPES Bigfoot Polishers vs Basic DA Polishers
    By Mike Phillips in forum Ask your detailing questions!
    Replies: 12
    Last Post: 02-11-2013, 01:43 PM

Members who have read this thread: 0

There are no members to list at the moment.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» March 2024

S M T W T F S
2526272829 1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31 123456