Dislikes: 0
-
Re: How To Use The Flex 3401
Originally Posted by Toxix
Obviously this isn't the case, what pad sizes are people using now?
You mean,
What size pads are people using with the Flex 3401?
or
What size pads are people using with the Porter Cable type polishers?
-
Super Member
Re: How To Use The Flex 3401
Originally Posted by Mike.Phillips@Autogeek
You mean,
What size pads are people using with the Flex 3401?
or
What size pads are people using with the Porter Cable type polishers?
I'm also curious which size pad you prefer on the flex. I've been using 6.5" pads with great results but have always been curious how much more cutting power could be had by dropping pad size down to 5.5". I've pre-ordered a 75E mini with 4" pads for intricate work so dropping pad size on my flex would not be for intricate work. Only to increase cutting power. Would it be worth it?
-
If I recall correctly, Mike will recommend the 5" flat hybrids. Need the LC interchangeable backing plate as well.
I recently started using those, and like them better than the 6.5 CCS pads I had been using.
-
Re: How To Use The Flex 3401
Originally Posted by Just02896
I'm also curious which size pad you prefer on the flex.
I've been using 6.5" pads with great results but have always been curious how much more cutting power could be had by dropping pad size down to 5.5".
I've pre-ordered a 75E mini with 4" pads for intricate work so dropping pad size on my flex would not be for intricate work. Only to increase cutting power.
Would it be worth it?
In my opinion and experience, if you're going to have and use a Flex 3401 then getting the Lake Country Adapter Plate System so you can get the 4" backing plate is a MUST.
5" pads fit so many panels better than 6.5" pads. The idea being not to buff on a raised body line or an edge.
Last night I buffed out my own truck. Classic Chevys like mine have HUGE flat panels so I used a 6.5" pad on the Flex 3401. But for most newer cars you want and need smaller pads. Then the ability to switch to the backing plate and pad that works best for the project in front of you is nice.
I just got off the phone with a guy in Houston, Texas. He's buying a Flex 3401 to remove sanding marks out of freshly painted, restored Kawasaki motorcycles.
I strongly recommended he get the backing plate adapter system and 5" Hybrid pads.
FWIW
-
Super Member
Re: How To Use The Flex 3401
Mike,
What speeds do you use when working the Optimum MF pad with compound, then polishing?
-
Re: How To Use The Flex 3401
Originally Posted by Sicktred08fsi
Mike,
What speeds do you use when working the Optimum MF pad with compound, then polishing?
I use the 4-5 setting. I learned a long time ago when writing how-to instructions for Meguiar's to always recommend a range, not a specific number. The reason why is there are too many variables involved for most people and most tools.
An exception to this rule would be the Porter Cable 7424XP. For the most part, if you want to do correction work you want to be on the 6 speed setting. Even with thin pads, small diameter pads.
-
Re: How To Use The Flex 3401
Great write up Mike. I have really been thinking about pulling the trigger on one of these. I know you are doing a demonstration at cars and coffee with the FLEX. I won't be able to attend as I will be out of town.
I had a couple questions for you.
1. Would I have to change my technique when using this vs my Shurhold DA polisher that I have now? How much of a learning curve is there with this tool? Or is it pretty user friendly like most DA polishers? I do have plenty of experience with a rotary (Makita 9227c) so I am used to the power of a rotary.
2. Can I use the 5.5 CCS smart pads with it? Or do you recommend buying new pads?
Thanks again. Hope to see you soon.
-
Re: How To Use The Flex 3401
Originally Posted by Smokinss
Great write up Mike. I have really been thinking about pulling the trigger on one of these. I know you are doing a demonstration at cars and coffee with the FLEX. I won't be able to attend as I will be out of town.
I had a couple questions for you.
1. Would I have to change my technique when using this vs my Shurhold DA polisher that I have now? How much of a learning curve is there with this tool? Or is it pretty user friendly like most DA polishers? I do have plenty of experience with a rotary (Makita 9227c) so I am used to the power of a rotary.
With your experience you'll pick up on how to hold and run the Flex 3401 in not time at all.
Originally Posted by Smokinss
2. Can I use the 5.5 CCS smart pads with it?
Yes with a smaller backing plate as the factory backing plate leaves no room for error.
Originally Posted by Smokinss
Or do you recommend buying new pads?
In my opinion, the Lake Country Hybrid Pads are optimized for the Flex 3401. If you get a Flex 3401 you should also get the Lake Country 4" backing plate so you can use the 5" Hybrid pads.
The Flex 3401 with 5" Hybrid Pads turns you into a swirl destroying machine.
-
Re: How To Use The Flex 3401
-
Super Member
Re: How To Use The Flex 3401
Originally Posted by Mike.Phillips@Autogeek
I use the 4-5 setting. I learned a long time ago when writing how-to instructions for Meguiar's to always recommend a range, not a specific number. The reason why is there are too many variables involved for most people and most tools.
Thanks Mike. I appreciate it!!!
Similar Threads
-
By IID in forum Flex Polishers
Replies: 18
Last Post: 11-11-2017, 04:35 AM
-
By DETAILROOKIE in forum Auto Detailing 101
Replies: 36
Last Post: 05-25-2017, 10:49 AM
-
By UglyBetty in forum Auto Detailing 101
Replies: 9
Last Post: 10-17-2013, 05:20 AM
-
By MichaelD in forum Boat & Marine Craft Detailing
Replies: 1
Last Post: 10-16-2012, 01:28 AM
-
By Grifftech in forum Auto Detailing 101
Replies: 12
Last Post: 08-29-2012, 02:44 PM
Members who have read this thread: 1
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks