First day using Bilt Hamber touchless.

[CleanIT]

You can also use BH AF in a sprayer. Works as well or better than foamer.


Sent from my iPhone using Tapatalk

[chilly]

You can also use BH AF in a sprayer. Works as well or better than foamer.


Sent from my iPhone using Tapatalk

Are you using the same dilution ratios with a sprayer?


Sent from my iPhone using Tapatalk

[opie]

Are you using the same dilution ratios with a sprayer?


Sent from my iPhone using Tapatalk

I use i think its 9 or so oz of touchless in 2 gallon garden sprayer

Sent from my SM-S901U using Tapatalk

[MisterSnoop]

How are you guys liking your touchless with BH. I used to import $$$ jugs from overseas with the many many threads over at DW.uk
Had subpar results.

I swore off importing said goods and while I have looked at the BH touchless many a times recently, I don't plan to spend many of pre-wash products anymore...
I swore off pre-washes or at least importing the good stuff
I'm just thinking the chemical-ology is just made for the water they have over there and not the water we got here ;-)

There's a domestic importer of BH. I was chatting with them about it when I was in their store. Doesn't seem like they have any exclusivity to import it. Sounds like it takes them 6-8 months to get things shipped and thru customs, etc. Could be a challenge for anyone deciding to do that without initial supply disruptions.

[DanaDetailingPros]

Amount of water X 0.04
I use 2 OZ. with my foamer 48oz X 0.04+1.92

[Coatingsarecrack]

How are you guys liking your touchless with BH. I used to import $$$ jugs from overseas with the many many threads over at DW.uk
Had subpar results.

I swore off importing said goods and while I have looked at the BH touchless many a times recently, I don't plan to spend many of pre-wash products anymore...
I swore off pre-washes or at least importing the good stuff
I'm just thinking the chemical-ology is just made for the water they have over there and not the water we got here ;-)

Did you get the dilution right? BHAF has been the only Pre wash I’ve used that makes a significant difference

My results are here and you can see a major difference.

What are your opinions regarding Bilt Hamber Auto-Foam?


Sent from my iPhone using Tapatalk

[Bruno Soares]

I used Touch-Less today for the first time. Car wasn’t too dirty so I did a 2% PIR using a PF22 foam cannon. After calculating the flow from my power washer, 2% PIR called for 7oz of soap in the cannon. 4% PIR would be 14oz. Looks like I’ll be using the 5L pretty quick.

I was impressed by the results. The foam running down made me see how the car wasn’t all that clean. And my driveway was dirty because the foam was brown as it ran down the asphalt.

After foaming I rinsed with deionized water and dried with my ego 765. Truly touchless

Only touching I did was to apply some tire dressing. Came out pretty good.




Sent from my iPhone using Tapatalk

[PaulMys]

I used Touch-Less today for the first time. Car wasn’t too dirty so I did a 2% PIR using a PF22 foam cannon. After calculating the flow from my power washer, 2% PIR called for 7oz of soap in the cannon. 4% PIR would be 14oz. Looks like I’ll be using the 5L pretty quick.

I was impressed by the results. The foam running down made me see how the car wasn’t all that clean. And my driveway was dirty because the foam was brown as it ran down the asphalt.

After foaming I rinsed with deionized water and dried with my ego 765. Truly touchless

Only touching I did was to apply some tire dressing. Came out pretty good.




Sent from my iPhone using Tapatalk

Damn, that came out pretty sweet Bruno!!

[DanaDetailingPros]

I had a roof only correction last week and I didn't want to conventionally use a foam cannon nor a soapy bucket and hand. But I also didn't feel like diluting at 4% So I did 2% and it did the trick just fine. Only thing I noticed was the foam wasn't as thick but it loosed everything just fine to pressure off!

[Coatingsarecrack]

I used Touch-Less today for the first time. Car wasn’t too dirty so I did a 2% PIR using a PF22 foam cannon. After calculating the flow from my power washer, 2% PIR called for 7oz of soap in the cannon. 4% PIR would be 14oz. Looks like I’ll be using the 5L pretty quick.

I was impressed by the results. The foam running down made me see how the car wasn’t all that clean. And my driveway was dirty because the foam was brown as it ran down the asphalt.

After foaming I rinsed with deionized water and dried with my ego 765. Truly touchless

Only touching I did was to apply some tire dressing. Came out pretty good.




Sent from my iPhone using Tapatalk

So when using in a foam cannon BH says to use sparingly. You don’t need to drench the car. Literally if it’s got a coat on it your good. One PF22 filled should do 2-3 times.

To be more economical get an IK foam pro 2. 4oz to 100oz of water will clean your suv 1.5-2 times…


Sent from my iPhone using Tapatalk