-
Regular Member
Anyone tried Hybrid Solutions Pro 1 and Done?
Hi AG,
I'm looking for a new one-step product (I'm a pure hobbyist). Obviously a ton of marketing behind Hybrid Solutions, but I was intrigued by the idea of a one step that can cut to different degrees so well using different pads. Seems like it would be a great thing to have as an occasional hobbyist (probably polish two cars a year, sometimes need a bit more or less cutting capability).
Hybrid Solutions Pro: 1 & Done Compound
Anyone tried it? If not, any other good one-steps that people recommend that can be used in such a versatile way with different pads? I assume they all be used with different pads, but just wondering what products do it well.
Thanks,
HAMBO
-
Re: Anyone tried Hybrid Solutions Pro 1 and Done?
I'll chime in....
I have not used this product but I wrote a very in-depth, comprehensive and GLOWING review for their one-step polish wax here,
Review: Hybrid Solutions Ceramic Polish & Wax
I was impressed with this product I tested, apple doesn't fall far from the tree.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
HAMBO thanked for this post
-
Super Member
Re: Anyone tried Hybrid Solutions Pro 1 and Done?
Yes it is a great product, I used it for some light correction on my rear bumper with LC 3.5" orange flat pads. Worked like a champ. Sorry before and after pics arent the greatest
Sent from my SM-G970U using Tapatalk
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
HAMBO thanked for this post
-
Re: Anyone tried Hybrid Solutions Pro 1 and Done?
Some Youtubers have noted its not the easiest product to wipe off the surface.
I've used sonax perfect finish to knock out some deep scratches on my toyota last year using the very course white foam pad from griots. Then followed up with the yellow soft polishing pad from griots with perfect finish and i was stoked with the finish.
3D One is another single polish, that's popular. I've have only used it on test panels. Its more aggressive then perfect finish.
Scholls has a new one too, looks like a trend.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
HAMBO thanked for this post
-
Re: Anyone tried Hybrid Solutions Pro 1 and Done?
I will be using it tomorrow on a Honda HRV. I will update tomorrow around this time
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Re: Anyone tried Hybrid Solutions Pro 1 and Done?
Originally Posted by
Billy Baldone
I will be using it tomorrow on a Honda HRV. I will update tomorrow around this time
Looking forward to it. The new TW pro line is sexy looking thats for sure. Lot sharper then the hybrid packaging.
Afterall, they do say you eat with your eyes first.
-
Re: Anyone tried Hybrid Solutions Pro 1 and Done?
Ok. Here is my short review. Flex 3401 and a LC orange force pad. Did a great job cutting and finishing. It seemed to cut better than 3D One. Wipe off was harder than it should have been. Overall a good product that does what it is supposed to do.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
-
Super Member
Re: Anyone tried Hybrid Solutions Pro 1 and Done?
Originally Posted by
Mike Phillips
I'll chime in....
I have not used this product but I wrote a very in-depth, comprehensive and GLOWING review for their one-step polish wax here,
Review: Hybrid Solutions Ceramic Polish & Wax
I was impressed with this product I tested, apple doesn't fall far from the tree.
I actually just tried this yesterday and was actually quite impressed. Not really having good or bad expectations going in I grabbed it off the shelf and figured what the hell.
I used it on a 2010 white Pontiac G6 (on the hard side) with a 21mm da and 5" Lake Country microfiber fiber. Damage was your usual daily driver/ automatic car wash combo and got almost 100% correction with a beautiful gloss.
Tried it with a green buff and shine pad and got probably 65% correction. Being white and a nothing special car I decided to go the micro fiber route.
Will definitely be using this product again.
Ripping through your mind like a hurricane full of novocaine
-
Anyone tried Hybrid Solutions Pro 1 and Done?
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
-
Re: Anyone tried Hybrid Solutions Pro 1 and Done?
OOOOOHHHH. Exciting!!!! Go Mike!!!
Bookmarks