Re: The Post a Picture of Your Ride as it Sits Thread
New addition to the driveway. Wash, polish with Griots FastFinish MF pad and Meguiars Ultimate Polish, IPA wipe, 2 coats of Meguiars Fast Finish. Windows were cleaned, clayed and Chemical Guys Jet Seal applied. Trim was coated with Meguiars Ulitmate Protectant, tires have three coats of Turtle Wax Endura Shine. Wheels also have two coats of Meguiars Fast Finish. I did the baggie test after washing and the paint felt smooth, so I decided to go straight to polish and not risk defects from clay bar. For what it's worth, I loved the microfiber pads.
Re: The Post a Picture of Your Ride as it Sits Thread
Originally Posted by ge0rge
New addition to the driveway. Wash, polish with Griots FastFinish MF pad and Meguiars Ultimate Polish, IPA wipe, 2 coats of Meguiars Fast Finish. Windows were cleaned, clayed and Chemical Guys Jet Seal applied. Trim was coated with Meguiars Ulitmate Protectant, tires have three coats of Turtle Wax Endura Shine. Wheels also have two coats of Meguiars Fast Finish. I did the baggie test after washing and the paint felt smooth, so I decided to go straight to polish and not risk defects from clay bar. For what it's worth, I loved the microfiber pads.
Passport?
Sent from my SM-G950U using Tapatalk
2022 Elantra N Cyber Gray Some say..."He likes Swedish fish because they're made with caranuba wax"
Re: The Post a Picture of Your Ride as it Sits Thread
Originally Posted by DMiglio
Love the little (pieces of wood?) to raise the tires up for an easy all around dress, too smart!! I’m gonna have to steal that Pilot is looking good!!
Pressure treated 2x6. I ran them width wise today. If you don't cut the ends at a 45° angle to drive up on and they are too long, you risk them kicking up and catching the underside of the vehicle. I didn't cut them, they wont kick high enough with my truck, thus why they are sideways.
Re: The Post a Picture of Your Ride as it Sits Thread
Pressure treated 2x6. I ran them width wise today. If you don't cut the ends at a 45° angle to drive up on and they are too long, you risk them kicking up and catching the underside of the vehicle. I didn't cut them, they wont kick high enough with my truck, thus why they are sideways.[/QUOTE]
So simple and yet very effective...thanks for sharing
Bookmarks