Post Your Unpacking Pictures

[Finick]

Used them once and I didn't like them - you may have better luck. Too small and grabby for my liking. And if you fold them your hands touch the window.

Will report back once I try them out. My thinking is that I might like the smaller size, because when I use my regular 16x16 waffle weaves they seem a little bit cumbersome. Around corners and when cleaning windshields. Lots of material that bunches up, although it may just be the way I hold them.







The huck towels are some super odd size like 20”x89’ and they’re equally as bulky, but they just glide over the glass like a piece of silk so I kind of just accept their quirky size.




Sent from my iPhone using Tapatalk

[Coatingsarecrack]

New PW flexible hose and some towels to remove my coating this coming march


Sent from my iPhone using Tapatalk

[Gunny Fitz]

Keep in mind I haven’t used it yet, but my first impressions of the kobrajet hose are very good. It feels like a damn fine hose, and I’m looking forward to using it. I’ll say this though, coiled up the hose is pretty heavy. I know that auto fanatic talks about using an Uber flex hose with his 1322, which runs like 100 bucks on amazon. Seems nice hoses in that 3/8 size run similar pricing, based on their recommendations.

A question I posed on another "Hose Thread" is - For a 2K PSI Electric PW, would one be better off going with an aftermarket 1/4" Hose OR going for 3/8" Hose? First thought is that the bigger hose (3/8) just "might" bring a decrease in Water Pressure in the end. Either way, I assume that all Quick Connects are in the 3/8" size - who sells a solid 1/4" Hose with all the proper 3/8" fittings for MTM Attachments? Shopping for hoses is tougher than it seems! lol

You can get pretty much the same setup straight from mtm hydro site. They just updated all their kits. I just picked one up and it’s excellent.

You made a purchase Direct thru MTM Hydro here?
Premium MTM Kit 3 - 50' 4,000 PSI #43.5010 – MTM Hydro Parts

At first glance the prices appear to be a tad higher from them, but then again WTH do I know?
Just need to create a Wish List and pull the trigger on something I guess. Or I can continue to struggle w the stiffest, stock Greenworks 1/4" Hose!
Choices, choices.......
Thanks guys!

[Oz_TCH]

[spazzz]

New PW flexible hose and some towels to remove my coating this coming march

Good call on the hose.
Good price on a good hose, nice and simple.

I got my Kompakt pads today, welllll except for the black ones.
Those were substituted with the backing plates.

Email out to customer service time, I am sure they will take care of it.

[Sb5181]

A question I posed on another "Hose Thread"



You made a purchase Direct thru MTM Hydro here?
Premium MTM Kit 3 - 50' 4,000 PSI #43.5010 – MTM Hydro Parts

At first glance the prices appear to be a tad higher from them, but then again WTH do I know?
Just need to create a Wish List and pull the trigger on something I guess. Or I can continue to struggle w the stiffest, stock Greenworks 1/4" Hose!
Choices, choices.......
Thanks guys!

Similar, I have the one with the gray hose and swivel end gun. I waited until they ran a sale and depending on what they have you can save 10 or 20 percent. The upgraded hose alone is worth it. I have a Ryobi and the stock hose would immediately coil up on itself to the point where I stopped using the pressure washer. Good luck


Sent from my iPhone using Tapatalk

[Coatingsarecrack]

Just used Ammo Frothe today. Stuffs is A-W-E-S-O-M-E


Sent from my iPhone using Tapatalk

[snowracer21]

Decided to indulge a bit. Don’t mind that fluffy mutt, she’s nosey as ever.














Sent from my iPhone using Tapatalk

[Coatingsarecrack]

Your dog is looking like “bro, if mom finds out......”. Lol. Love some Shepard’s.


Sent from my iPhone using Tapatalk

[snowracer21]

Your dog is looking like “bro, if mom finds out......”. Lol. Love some Shepard’s.


Sent from my iPhone using Tapatalk

Yuppp, she’s awesome


Sent from my iPhone using Tapatalk