Dislikes: 0
-
Super Member
Re: Polishing glass question
Originally Posted by java
Thanks for the reply!
Look good.
Is this the kit you used Griot's Garage Glass Polishing System
Which polisher did you use? Beside my rotary I have the first generation Porter Cable 7424. In which I don't think it would be effective on polishing a windshield.
Yes, I used the Griots Glass Polishing System. It is a great product but do not expect any miracles. I modified the process a little starting by cleaning the glass with Invisible Glass. Then I use the Invisible Glass as a lube and used 0000 steel wool. Then I clayed the windshield again with Invisible Glass as a lube. Then I went through the polishing process. The glass polish is a FINE glass polish designed to remove minor scratches and water spots. If you notice my windshield, all of the pitting is still there. I used my new Griots GG6 polisher and I went over the same area three times. The GG6 has more usable power than the Porter Cable 7424 XP (850 Watts vs. 540 Watts), but the Porter Cable should be able to remove any water spotting. For more serious glass polishing, you would need a more powerful machine like a rotary and a stronger polish.
The Griots glass sealant was easy to apply and easy to remove.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Polishing glass question
I used the Griots polish and pad last night with my Flex.
Has there been any mention of using an interface pad to help follow the curve.
I let my daughter try it last night and she kind of heated up the rayon pretty good. Ooops, learning curve.
Anyway I'm trying the Carpro setup next, the Griots does clean the snot out of the glass but it would be nice to see more wiper marks disappear.
-
Re: Polishing glass question
Originally Posted by spazzz
I used the Griots polish and pad last night with my Flex.
Has there been any mention of using an interface pad to help follow the curve.
I let my daughter try it last night and she kind of heated up the rayon pretty good. Ooops, learning curve.
Anyway I'm trying the Carpro setup next, the Griots does clean the snot out of the glass but it would be nice to see more wiper marks disappear.
In the 4th post of this thread, there's a recommendation to use the Innerflex pad:
Review: Griots Fine Glass Polish - How to remove water spots and road film off car glass
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
-
Super Member
Re: Polishing glass question
Originally Posted by java
Thanks everyone for the replies!
I have a few different compounds I'm going to try next.
Have you had a chance to try it again?
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
-
Super Member
Re: Polishing glass question
Originally Posted by Kappy
Thanks.
Unfortunately the Griots Interface pad gets lousy reviews.
I found some on amazon. Now it's a matter of 5" soft or medium.
I would think medium since the rayon pad make it rock hard by itself.
-
Re: Polishing glass question
Originally Posted by spazzz
Thanks.
Unfortunately the Griots Interface pad gets lousy reviews.
I found some on amazon. Now it's a matter of 5" soft or medium.
I would think medium since the rayon pad make it rock hard by itself.
I didn't see any reviews before purchasing the 5" Griot's Innerflex pad. I've used one pad four or five times; haven't had any problems with it, and it made a noticeable difference in how the pad itself conforms to the glass. I wonder if the reviewer reported the incident of the foam separating to Griot's, or Autogeek, and if they replaced the pad?
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
-
Super Member
Re: Polishing glass question
Maybe they remedied it by now.
So it does work pretty good?
I mean really, I don't stand on it so I shouldn't have a problem.
I'm not trying for unrealistic results, just want the film off.
Thanks for getting back.
-
Super Member
Re: Polishing glass question
The interface pad is a great idea for use with the rayon pad. You need something to conform to the glass curvature.
After my fail with the wool pad I went back to my Megs microfiber cutting pads. First I tried Wolfgang Perfekt Finish Glass Polish, a no-go. I grabbed my new bottle of Menzerma SC 300 and easy-peasy done. The Wolfgang stuff was disappointing.
-
Re: Polishing glass question
Originally Posted by spazzz
Maybe they remedied it by now.
So it does work pretty good?
I mean really, I don't stand on it so I shouldn't have a problem.
I'm not trying for unrealistic results, just want the film off.
Thanks for getting back.
I don't remember if I missed the recommendation for the inner pad, or just decided to get the glass pads first and see how they worked, but the first time I tried the polish I had some areas where I felt like the pad wasn't making good contact with the windshield. Then I bought the inner pad and it has been a much better experience.
Let me add that I am far from a detailing expert, although Mike Phillips is, and if he recommended the Innerflex Pad I should have listened to him in the first place.
-
Re: Polishing glass question
Originally Posted by UncleDavy
Yes, I used the Griots Glass Polishing System. It is a great product but do not expect any miracles. I modified the process a little starting by cleaning the glass with Invisible Glass. Then I use the Invisible Glass as a lube and used 0000 steel wool. Then I clayed the windshield again with Invisible Glass as a lube. Then I went through the polishing process. The glass polish is a FINE glass polish designed to remove minor scratches and water spots. If you notice my windshield, all of the pitting is still there. I used my new Griots GG6 polisher and I went over the same area three times. The GG6 has more usable power than the Porter Cable 7424 XP (850 Watts vs. 540 Watts), but the Porter Cable should be able to remove any water spotting. For more serious glass polishing, you would need a more powerful machine like a rotary and a stronger polish.
The Griots glass sealant was easy to apply and easy to remove.
I'm not planning on removing any wiper scratches or rock chips. I just want to remove the previous coating for the new coating.
I have no steel wool but I did used the Clay Magic blue clay with car wash soap as lube.
How's the Griot's glass pads? Do they same durable? I tried my 3M wool pad and Lake Country purple foam wool with Meguiars M101,M105, with a rotary. No luck there.
I do have Meguiars microfiber cutting pads, that I haven't tried yet.
Who would figure a 2+ years old coating would be so hard to remove.
Similar Threads
-
By vinharski in forum Show N' Shine
Replies: 17
Last Post: 02-01-2017, 05:08 AM
-
By dougaross in forum Auto Detailing 101
Replies: 2
Last Post: 04-28-2012, 01:07 PM
-
By AutowerxDetailing in forum Auto Detailing 101
Replies: 1
Last Post: 04-23-2012, 06:16 AM
-
By Bunky in forum Auto Detailing Tools and Accessories
Replies: 1
Last Post: 07-16-2011, 10:38 AM
-
By builthatch in forum Auto Detailing 101
Replies: 11
Last Post: 10-19-2010, 03:26 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks