-
Super Member
-
Post Thanks / Like - 1 Thanks, 9 Likes, 0 Dislikes
-
Super Member
Re: The daily with CQUK 3.0 + Gliss V1
The only issue I had was that Gliss developed a haze 48 hours after the initial application. It was the only time that this has occurred. The other times it has not. It was gone after the first wash.
-
Super Member
Re: The daily with CQUK 3.0 + Gliss V1
Originally Posted by
The Guz
The only issue I had was that Gliss developed a haze 48 hours after the initial application. It was the only time that this has occurred. The other times it has not. It was gone after the first wash.
I have that happen too. I'm not sure why. I call it "sweating" as it seems like as the layers cure they sweat off this haze. Goes away after and stops after a couple days.
2019 Pearl White Accord 2.0T Touring (mine)
2023 Snowflake Pearl White CX-30 Turbo Premium Plus(wife)
2010 Urban Platinum Metallic CRV EX-L & 2014 Mica Black Metallic Toyota Corolla S (kids)
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Re: The daily with CQUK 3.0 + Gliss V1
One of the nicest Pontiacs I've seen
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: The daily with CQUK 3.0 + Gliss V1
Originally Posted by
TTQ B4U
I have that happen too. I'm not sure why. I call it "sweating" as it seems like as the layers cure they sweat off this haze. Goes away after and stops after a couple days.
Let's hope that the new V2 addresses this issue.
Originally Posted by
showbbq
One of the nicest Pontiacs I've seen
Thanks.
-
Super Member
Re: The daily with CQUK 3.0 + Gliss V1
Originally Posted by
showbbq
One of the nicest Pontiacs I've seen
-
Super Member
Re: The daily with CQUK 3.0 + Gliss V1
Super fine looking GP, Mike.
You even have the Camaro in the driveway.
I am interested to see how these test spots fair.
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes
-
Re: The daily with CQUK 3.0 + Gliss V1
Thanks for doing this test! There's no plan to top any of these reload, correct? What's the difference between CQTi02 and CQUK3.0?
I still refuse to believe that a "coating prep wash" stripped a coating. In my opinion if it's safe enough you can mix it in a bucket and put your hand in it then it shouldn't even strip sealants let alone a coating. I have a few theories but the sonax is gone on to next haha.
-
Super Member
Re: The daily with CQUK 3.0 + Gliss V1
Originally Posted by
spazzz
Super fine looking GP, Mike.
You even have the Camaro in the driveway.
I am interested to see how these test spots fair.
Thanks Tim. Good to see you around. It’s been awhile.
FYI I did the Camaro before the GP. The Camaro is now wearing GTechniq Crystal Serum Light topped with Exo V3. Haven’t done a write up on it.
Originally Posted by
DetailZeus
Thanks for doing this test! There's no plan to top any of these reload, correct? What's the difference between CQTi02 and CQUK3.0?
TiO2 contains titanium dioxide mixed with SiO2. The TiO2 gives it more reflectivity. At one point it had better stain resistance and better with water spotting.
UK formed the harder layer, although coating hardness is overrated. CQUK 3.0 has been tweaked to handle water spotting better. It is only SiO2 and a higher content of it.
I don’t use Reload or toppers on my personal cars. It will only be getting Ech2o as a drying aid when I wash. I have already used Ech2o on it a few times in these past 2 months since I have recoated it.
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: The daily with CQUK 3.0 + Gliss V1
Originally Posted by
showbbq
One of the nicest Pontiacs I've seen
I agree! Awesome looking vehicle/paint/everything! Well, well done!
Scott Harle
Autodermatology
#autodermatology
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes
Bookmarks