LC Bogo pad descriptions

[Sylox]

Just wanting the scale for the 6.5 LC FLAT Pads that are on BOGO at the moment.
Yellow/Orange/white/light green/green/red/blue/gray
The flat pads on the LC Website are only Orange/black/white.

Planning on trying the 105/205 combo on a Makita Rotary with them. So suggested combos for the megs gear and these lc pads.



I run for my 3m products

• Double sided wool cutting
• Megs 8" Red cutting
• GPI 6" White cutting
  Any of the above 3 with 3m Imperial compound 06044/rubbing compound 06085 depending on correction required
• Megs 8" Yellow Polishing
  Heavy Polishing/light cutting with 3m rubbing compound 06044
• 3m 8" black Waffle Polishing
  With 3M machine polish 06064
• Megs 8" White finishing
  3M 8" Blue Ultrafine finishing
  With Ultraafine machine polish 06068
  
  
  Thanks Guys

[CEE DOG]

Here you go brother.

Autogeek Buffing Pad Comparison Chart

Pad Comparison Chart

[fenderpicks]

Man i have the same question too... and im too dumm to understand the charts lol....
I just dont know what the light green and green flat pads are for in the BOGO

[SonOfOC]

Stick to orange, white, black, and if plan on buying the 6.5" BOGO for use on rotary.

Resist the BOGO temption if plan on using the 6.5" on a Porter Cable DA.

[Sylox]

Originally Posted by CEE DOG

Here you go brother.

Autogeek Buffing Pad Comparison Chart

Pad Comparison Chart

Fantastic ! Give your self a pay rise

Originally Posted by SonOfOC

Stick to orange, white, black, and if plan on buying the 6.5" BOGO for use on rotary.

Resist the BOGO temption if plan on using the 6.5" on a Porter Cable DA.

Thanks

[5.4 Shelby]

Originally Posted by SonOfOC

if plan on buying the 6.5" BOGO for use on rotary.

Or Flex 3401.

[fenderpicks]

So these BOGO pads are not good for FLEX 3401?
Im about to stock up the BOGO pads for my flex 3401!!

[_Raven]

They are appropriate for the FLEX, since it is forced action. I believe the recommendation against the larger pads on PC and similar DA system comes from the potential for the pad to have difficulty rotating.

Sent from my SPH-D700 using Tapatalk

[fr0mastaj]

Originally Posted by fenderpicks

So these BOGO pads are not good for FLEX 3401?
Im about to stock up the BOGO pads for my flex 3401!!

I believe they meant only get the BOGO pads if you have a rotary OR flex.

The PC cannot handle it, Flex can.

[5.4 Shelby]

Originally Posted by fr0mastaj

I believe they meant only get the BOGO pads if you have a rotary OR flex.

The PC cannot handle it, Flex can.

Yes, that is what I meant. Flex 3401 has no problem with 6.5 inch pads. Sorry if I confused anyone.