WG Deep Gloss Spritz Sealant

[Reddwarf]

Question regarding the Wolfgand Deep Gloss Spritz Sealant. I have WDGS on my car topped with Natty's Blue. I'm assuming the Spritz Sealant should not go on top of a nuba? Next time I polish, if I go with just the WDGS then the Spritz Sealant would be used periodically instead of a nuba topper?

Does the Spritz Spray require many hours to cure like the WDGS?

[supercharged]

Originally Posted by Reddwarf

Question regarding the Wolfgand Deep Gloss Spritz Sealant. I have WDGS on my car topped with Natty's Blue. I'm assuming the Spritz Sealant should not go on top of a nuba? Next time I polish, if I go with just the WDGS then the Spritz Sealant would be used periodically instead of a nuba topper?

Does the Spritz Spray require many hours to cure like the WDGS?

I would not use it over nuba. Use it as QD after a wash. And speaking of curing time - it's 1 hour.

here it is, cut and pasted"

You may apply multiple coats of Wolfgang Deep Gloss Spritz Sealant if desired. Wait 1 hour between each coat for maximum bonding. Multiple coats will not turn yellow and the shine will only increase in depth and brilliance.

[Reddwarf]

Originally Posted by supercharged

I would not use it over nuba. Use it as QD after a wash. And speaking of curing time - it's 1 hour.

here it is, cut and pasted"

You may apply multiple coats of Wolfgang Deep Gloss Spritz Sealant if desired. Wait 1 hour between each coat for maximum bonding. Multiple coats will not turn yellow and the shine will only increase in depth and brilliance.

Thanks. I guess I was being ADD when I read the website. I completly missed that 1 hour bit.

[killrwheels@autogeek]

admitting to the mistake is half the battle, well or so my wife says !!

[nick19]

Originally Posted by supercharged

I would not use it over nuba. Use it as QD after a wash. And speaking of curing time - it's 1 hour.

here it is, cut and pasted"

You may apply multiple coats of Wolfgang Deep Gloss Spritz Sealant if desired. Wait 1 hour between each coat for maximum bonding. Multiple coats will not turn yellow and the shine will only increase in depth and brilliance.

So you can use it ontop of a 'nuba, AFTER a wash right?

[bambo2888]

Originally Posted by nick19

So you can use it ontop of a 'nuba, AFTER a wash right?

what's the difference?

[nick19]

Difference of what?

[bambo2888]

whats the difference between putting the spritz over a nuba before or after a wash or over it at all? i figure a qd is just something to remove dust and light dirt whenever on whatever.

[BILL]

Originally Posted by bambo2888

whats the difference between putting the spritz over a nuba before or after a wash or over it at all? i figure a qd is just something to remove dust and light dirt whenever on whatever.

.......i use it all over everthing......no problems

[Surfer]

AW seems to be the only real spray sealant that bonds well over a wax, I know others have tried with WG and other spray sealants w/o much luck.