Wolfgang Process?

[Reddwarf]

I have several of the older Wolfgang products.

1. Paintwork Polish Enhancer

2. Finishing Glaze (old formula)

3. Deep Gloss sealant

Would the correct process be 1, 2, 3?

If I need to use a polish like PB SSR 1 or SSR 2.5 would that go before 1 or after 1?

[killrwheels@autogeek]

your good on your steps. I believe the original Wolfgang Finishing Glaze was still a light polish versus a true glaze also.

If polishing remove step one and likely two as both are redundant.

[Reddwarf]

Thanks killr. I'll see if I can skip the polish and use the 3 wolfgang trio.

[Reddwarf]

I tried the Paintwork Polish Enhancer and it left the paint feeling so smooth and looking shiny, but there are lots of swirls. I tried the finishing glaze and the paint looks wet but with lots of swirls! Now, all shiny swirls!

I moved on to the XMT 2 and 3 to see what I can do with that.

[killrwheels@autogeek]

remember finishing glaze is a final polish or finishing polish and likely is not strong enough for swirls. You are correct to move to more abrasive polishes.

I only use a paint cleanser on perfect paint .. otherwise I grab the polish.