In this shot I'm setting up the Flex PE14 with a blue 4" CCS Finishing Pad that we're going to use on a thin panel on the front of the Corvette.
Here's Max going over some of the points he wants covered in this segment. Dennis is great at making sure all the right information is presented so the features on his show are both fun and educational. 
The guy on the right is Ben, he's the Producer and before we start we have a meeting on how we're going to open the segment and then the direction we're going to go with the information and then where we'll stop before moving over to work on the Corvette.
In this segment we shared how modern rotary buffers have changed in the last few years becoming smaller, lighter and more compact with lower RPM ranges than the rotary buffers that most people are familiar with. We also talked about the huge variety of pads types and sizes that are available to enable a person to match the pad to the panel for best results.
After we taped this feature I got a picture of Scott and Dennis in Scott's Corvette... 
And then I thanked Scott for taking the time to bring us he Corvette and also for letting us work on the finish. 
IF you're going to SEMA in a few weeks Dennis will be in our booth signing autographs on Wednesday, November 2nd, from 1:30pm to 2:30pm.
Celebrities at Autogeek's 2011 SEMA Booth 
Linear Mode
