- Just got my PC 7424 Poorboy's and Pinnacle
- Frayed orange pad
- On The Fence
- Product/pad Q's
- Wolfgang 3.0 Does it Again
- I am not getting the desired results!!!!
- my PC sat out in the rain
- The ultimate detailing machine
- Broken down polish
- Still Swirled after Menz FP
- Pc At An Angle?
- Need help with E3K pad choices
- What to buy for a UDM to use 4" pads?
- PC on Classics?
- Got my order now looking for help
- Problem with Meguiars and PC
- udm ????????
- autogeek and udm...
- What am I doing wrong
- PC Handle
- LC pad leaving marks
- 4" pad compatibility issues
- Help with removing moderate swirls
- LC pad problem... HELP!
- CCS Smart Pads???
- Pinnacle Paintwork Cleaner Help
- Pads and Speed
- Defective or normal?
- Anyone use 1Z Einzette black bottle polishes?
- Tips on polishing I have been playing with my UDM and have been using a 5-in backing
- Need PC tips around bumper, etc.
- Pc or g110?
- PC Combo ?
- Fresh Paint
- Need help getting PC setup.
- New 2008 vehicle
- Anyone try 3M Perfect-It II polish? Menzeran Nano?
- SIP & Nano Working Time
- Best kit for my needs?
- Before first time use - Question
- poorboys world professional polish
- Help a PC7424 noob. Made paint worse!
- Question about my UDM???
- Pad Conditioner
- polyurethane enamel polishing
- Miata scratches and swirls
- Thinking about buying PC for boat/car task
- Edge2000 Orange/Green Pad
- ccs vs cobra cross?
- Edge pads and bonnets
- Foamed wool 3.5. dream come true
- Rotary Backing plate for 6.5" Pads
- New to DA buffing
- Review -Edge 6" wool pads
- Pad Size
- Pad Exploded ...
- pad not spinning
- Pad and Conditioner
- Who's Using System One & the wool/foam pad with a PC?
- Cleaning CCS pads?
- Need clarification.. Edge Orange pads... Light cut or Heavy cut?
- FLEX + Extension cord
- UDM Reliability?
- Ordering Porter Cable, Need Help
- Flex and pad question?
- PC Back Plate Question
- orange pads from autogeek...
- 3M pads any good?
- Porter Cable Advice
- Pads for rotary ?
- Pad washing help
- Help!!!!!!!!!!!!!
- taking the backing plate off the flex
- Why?
- Uneven surfaces
- udm -vs- pc
- Question from UDM Newb
- Detailing a boat need some help!
- New to the forum and PC 7424
- Ridgid 2611,any other users here?
- Need Help
- Super-fine haze / micromaring? help?
- Flex+LC purple wool
- Flex ?
- Confused?
- Side skirts/Ground effects question...
- Flex Problems, NOOOOOOOOOOOOOO!
- Pads
- Newbie PC questions
- one step or glaze with fillers
- Storing the PC
- Lake Country Pad chart.........
- Porsche CC hardness
- HELP: How to remove backing plate
- Porter cable w/ klasse AIO
- Help!!
- Pad trade
- PC and Menz
- Just Ordered
- 5.5" pads-which backing plate???
- What can cause very fine micromarring/buffer trails?
- Poorboys SSR1 TURNS MY WHTE PADs PINK!!!
- What pads for Flex ?
- Shhhh... a little UDM discount
- A Few Things
- Which counter-weight to use with 3.5" BP and 4" Pad
- Review: Bosch 1370DEVS
- Why the Flex?
- dont know where this goes
- Tape off ridges when polishing ?
- Got my UDM today :) now i'm concerned :(
- Which combo of backing plate/counterweight for PC
- Home made case for g100
- YUP!, another package thread..., sorry...
- udm handle
- I need some education on pads
- Do you think I need a PC?
- Hope I made the right choice
- UDM review
- General pad question
- 7424 or UDM
- flex question
- LC CCS pads - different from previous order
- What's the status on the Flex?
- 7424 First Purchase
- Which one is the best BP 5' vs 6' for UDM?
- CCS Pad Selection
- 7424 order
- Pads for Flex?
- Drying pads
- placing first order ever
- Edge Pads
- Pad selection
- The Edge2000 wave pad with UDM
- Customized FLEX in action!!!
- which one
- porter cable noise?
- It's here!!! It's finally here!!!!
- pc 7424
- Foamed wool pad with the flex?
- Just saw this for the PC!!!
- UDM is Broken
- Products on hand
- trouble with UDM
- klasse and a pc
- Cyclo Users
- Which One
- pc and sling
- dealer induced scratches
- Jumping CCS 6.5' white pad with UDM
- How do I the white pad with the UDM?
- Has Anyone Tried the Foamed Wool pads?
- Must gets with the PC?
- How long does ur LCC Lo Pro white pads last?
- decals on vehicle
- gary26
- Can I cut my 6.5" CCS pads to make'em smaller?
- Quick Questions
- has anyone tried the flex xc3401vrg yet.
- Fancy CCS Pads
- Having correction problems?
- LCC White pads New and Old
- ccs 5 1/4" pads
- pad question
- New to Porter ?
- Cant believe it!
- 4 inch wool
- Centering the pad?
- Wax Too Greasy???
- Did I screw up or get a defective pad??
- Thinking about the pad washing machine..
- Cyclo - Will it accept CCS 4inch Pads..??
- New porter cable 7424 tips needed
- 2 PC's - time for pads & plate upgrade
- Help me decide
- Porter Cable issues
- Buying a PC but need help with pad choices
- Anyone got a PC for sale??
- New to the PC7424
- Menzerna's SIP/106FF.....what type of pad?
- I need some education on PB's SSR products..
- Granite
- What if it's not a flat panel?
- How far can I go??
- Tape?
- Edge system failed......
- Tried my PC on my friends C5
- Prepping CCS foam pads...
- Backing plate question
- Can I use these with a PC or UDM?
- Prep before polish/wax job
- Scared to death!
- My Dad Goofed
- anythine cheaper than the PC
- Metabo settings?
- best polish for gettin swirls out??
- Paint Imperfections Question
- Sore palm after day of polishing???
- How come they don't make a "UDM" specific forum???
- Newbie ready to buy the 7424 but polishes?
- LC green pads
- Which Polish
- Wool Pad washing
- Observations w/ 106, questions.
- Optimum compound, or Menz IP??
- UDM Backing PLate
- How long should velcro backing last?
- pad or polish? which one do I upgrade first?
- best pads. high vs low profile, flat vs ccs
- 4-in yellow cyclo vs LC yellow
- advice for what to get with PC
- Rotary Pad question
- "How to" cd using porter cable 7424
- Opinion/Help with swirls and surface
- XMT dusting up?
- Suggestions for polish needed
- Anyone have a problem with grease/oil coming out of the PC 7424 or Edge Adapter ?
- Rotary and P.C wattage???
- Wool Pad
- 6.5" Pads w/ 5" BP
- Cleaning Pads during a Detail.
- How much product?
- First time user of PC7424 & Klasse Sealant
- Melted / Seperated Backing Plate
- Ummmm Dont Do This!!!!
- Splatter
- How did you first start using a DA?
- Bonnets
- So what is the verdict? CCS pads or good ole' flat pads?
- What is "Dry Buffing" and what are the consequences?
- PC spitting out small "grains" of XMT3
- PC, pads and Meguiars
- Question about new Edge Wool Pads
- pad stuck on PC
- PC question: spinning
- Backing Plates
- Porter Cable 7424 Pad Included with machine
- Some advice on how to approach this?
- New Technique- Pad cleaning
- Which product goes with what pad?
- PC stats
- Orange Pad
- Washing LC CCS Pads before using?
- edge20006 pads for DA only?
- PC Buffer and starting point
- 4" pads vs. 6.5" pads?
- curved body panels and the PC question
- Tips and advice appreciated
- What do you guys use the low profile pads for?
- LC Pads