- Porter Cable 7424 Pad Included with machine
- Some advice on how to approach this?
- New Technique- Pad cleaning
- Which product goes with what pad?
- PC stats
- Orange Pad
- Washing LC CCS Pads before using?
- edge20006 pads for DA only?
- PC Buffer and starting point
- 4" pads vs. 6.5" pads?
- curved body panels and the PC question
- Tips and advice appreciated
- What do you guys use the low profile pads for?
- LC Pads
- Help! PC burning pads!
- better detais thru marketing
- Any one ever had this problem with the edge pads?
- Done with Edge!
- about to buy a pc.need help!pls!
- wanna trade some 4 inch pads for some ccs and other pads?
- What size pad do you use? (pc)
- PC/UDM + Menz SIP + No clear coat = ???
- Edge v LC CCS - which is better
- Original Edge Pad help
- Pad brush or tootbrush to clean pads
- Edge 200:Wool Pads
- PC extension adapter...
- Porter Cable 110v to 220v?
- Proper Glaze technique?
- Moldy polishing pads
- For those that own a rotary.....
- freebie orange pads
- Too Aggressive pad choice?
- First run with the PC
- Just got my pc and i cant even use it!!!! help
- Danase LC CCS Pad question
- water spots etched into windows
- Polishing head lights
- Guessing this will be fine to use
- 360, spot light, pad centering.
- Changing pads/changing products?
- please read! final plan, I think
- Edge 2000 pads lifespan
- Is the rotary really that difficult?
- Newbie PC Kit Recommendations
- PC questions b4 using tomorrow...
- If you had your choice of .......
- Yellow CCS cutting pad
- WolfGang Low Profile 5.5 light cutting pads
- New To Forum - My Introduction
- Wool Pads
- My Plan, long questions.
- Wolfgang ETS Dual Action 6.5
- Using the 7424 around Rock Chips
- Still have swirls/water spots...help!
- Looking for Tips, Tricks, and Techniques with the PC!
- Getting a PC for the first time -Need product suggestions
- Swirls & Waterspots on BMW
- pad selection-need help
- Problem...HELP? I dont think this is right?
- I have to get use to this...
- New to the PC
- Wave vs. Regular
- need help with first detail!
- Same pad, different products?
- CCS orange pad
- Porter-Cable 7" Variable-Speed Polisher
- Stupid Mistake...need suggestion!
- Backing Plates
- Edge Waffle or Regular?
- Wax removal by hand or machine?
- Bulk Pads orders...
- EDGE Adaptor Broke
- Why dont we have a different forum for rotary uses
- Pad Cleaner?
- Just got PC 7424 (Need Help)
- Trouble with Edge 2000 Wave pads!!
- Just ordered PC
- LC CCS Pads
- Edge 2k pad issues
- Edge 2000 pad failure, 2nd use.
- What do I need???
- How I use the PC (videos & pics)
- The fix for Edge Pad Clearance
- New to the PC, have a couple questions
- Who machine washes their Edge 2k and Lake Country pads?
- Speed
- How hot does your PC 7424 get?
- Question re: AG's CCS Pads
- 1st time using my 7427 today....
- What speed to use with 7424 & Edge 2000's
- Can't stand the wait
- Will this extension cord work with my porter cable with no problems?
- New member and PC-7424 user
- Edge 2000 Pad
- My detailing plan with pc - some questions
- Question about an Orange LC pad!
- Machine washing pads
- Gonna Order One...
- Question on edge 2000 pads
- Why aggressive pads?
- CCS vs "Classic" Pads
- XMT and pad question
- Another PC noob question
- What SHOULD XMT2 take out?
- Ok - do I need XMT4, Menzerna, or what? HELP!
- pc white pad?
- PC for the smaller panels?
- CCS pads on Amazon -- cheaper!
- Need recommendations on 6,5" pads?
- 5.5 Pc Pads....
- First time using PC, couple of Qs afterward, Long (sorry)
- I Cry Foul on Product Working Time
- 5 inch plate w 7 inch pads
- 7.5" LC pads with PC?
- Pads w indents
- How loud?
- Average Life of CCS pads
- 1st pc what do i need to make it work!?!?
- Which Pad?
- 4" Pads: You Likey?
- Centering 6.5in pads on rotary backing plate
- Ruined....
- Anyone notice that PB breaks down a lot quicker than XMT?
- PC just not cutting it..... Help
- Just joined and ordered PC
- Better Value in Edge Pads
- OP and Poly Seal - Cyclo and PC
- i got the 7424 w/CCS pads ..help with polish/wax needed
- Which CCS pads should I buy?
- This is how the PC really works
- Suggestions on PC combo's...
- PC 7424...insight needed!
- PC Pad Questions - now what? Help!
- Festool ETS 150/5.....any comments?
- To Wave or Not to Wave...
- which pc
- Pads Wont Dry
- Who has used the Lake Country CCS pads?
- Using counterweight with PC and Edge Pads
- If you had to pick just one pad...
- How can you tell if the paint can be buff
- Any Tips????
- 4inch pads
- 7424 Or ?
- Porter Cable 7335
- What is the biggest backing plate I can use for my 7424
- Time to skin the cat!!
- Why the 2500rpm limit on Edge pads?
- Will PC 7424/7336 be discontinued?
- LC CCS vs Edge flat vs Edge Wave pads
- best pc 7424 kit to start with?
- Backing Plate size difference
- Pad Choice
- 7.5 or 8.5 edge pads for rotary
- pad cleaner
- 7.5 Cc Pads
- Edge 2000 pads
- New PC
- The Old Crystal Mist
- Using the pc gives my teenage son a BADLY swollen hand...why?
- Polish Question
- DW443 + LC Polishing pad + megs #80/83 = disaster
- 7336 PC reduced price?
- Need help on pad/paste wax application. Also PC 7336sp vs 7424
- PC mf bonnets
- Backing plate ripped in half
- PC - needs to be lubricated?
- Score!!!!!!!
- Big Problems. Need help
- Pad Questions
- Can my Pads be Saved
- Three PC questions......
- be careful of polishing scratches!
- Which Pad kit to buy
- Able to use 6" Edge pad on rotary ?
- Rotary Bonnet
- Will my pad fix itself?
- Backing plate question
- new pc user needs help
- Question for the Pro's
- DA vs. rotary Pads
- First detail with the 7424 - questions.
- Is this bad?
- Edge2000 Buffing Pads
- Polishing the glass
- Cleaning your tub or sink
- Body preparation?
- Big thumbs up to EDGE!
- Does this sound ok?
- Pad Advice
- Please Help....
- Edge 2K pads
- need help/recommendations on acid rain etchings
- Edge 2K Lambswool
- Decal Pin Stripes & The PC ???
- Woot! Learned a little PC trick today.
- first time with PC this weekend, any advice?
- Edge2000 DA vs. Wave Pads
- Pressure on PC
- Polishing "Fun"
- Which 7424 kit to buy from AG?
- My pad bounces...
- First time questions about a PC and Polishing Charts
- pc is a pain - literally! anyone else?
- WOOT! My stuff came today!!!!
- Decent Foam Pad Cleaners?
- When using a DA.........
- Cyclo vs. PC
- beginner at swirl removal
- Pc Update - For those who care
- PC Results
- Need help with results from XMT
- WOOT!!! My first order, it's a nice one!
- W7006 with M-85, impossible combination to PC?
- I got the Deal of the Day on my PC!
- Used Pc Once And Its F----- Already, Very Angry.
- Pads gumming up
- HELP! Which PC!?!? 7424 or 7424HD?
- My coming of age with the PC saga....(lots of pics !!)
- pc 7336 or pc 7424?
- new rotary! now some questions!
- Broke down and got a 7336sp from LOWE's
- Excessive vibration normal w/ 7424?
- New PC - Which pad and speed to use?
- Just Ordered My Pc!! Yayayaya
- Ordering a PC... does it come with a case?
- Christmas is coming...
- Kress CPS 6125 E
- PC 7336SP - Very Unimpressed
- Just ordered a PC7424
- I have a Q before buying the PC 7424?
- Extension Cord
- Lookie what i got today
- woot. getting a rotary!
- removing wax with the PC 7424?
- EDGE Pads
- Just ordered 7424 and Edge 2000 "complete" pad kit. Agonizing over which
- Pads: Meguiars oder Lake country, washing?
- AG backing plate difference
- PC Speed for AIO
- PC 7424 & Edge 2000 8" Durafoam pad
- Edge pads which would you pick?
- Pad Use
- Backing plate : Which one to buy?
- PLEASE HELP WITH ORDER - Can't wait ANYMORE - Taking the PLUNGE !!
- Am I using my PC correctly (vid) 56k ouch!
- Question about the PC7424
- Meguiars #83, #84 or Pinnacle XMT Series?
- P.C. wattage