Sign-up: 1965 Mustang GT - Wetsanding for a Show Car Finish

[Mike Phillips]

Sign-up: 1965 Mustang GT - Wetsanding for a Show Car Finish

Live Broadcast starts at 6:00pm

Thursday, January 3rd, 2013

I just showed a guy named John that heard we had a new way of removing swirls the 3" Griot's Garage Polisher as a sander for his 1965 Mustang GT because you can see where the body shop hand sanded close to the edge and,

• Left their sanding marks
• Left their tracers
• Left their swirls

The key to a scratch-free and swirl free finish when sanding starts with the sanding and having a 3" foam backed disc for the finish sanding cannot be beat.


We'll see the Mustang here in the future. John is coming back to see our new way of removing swirls tomorrow night for the Thursday Night Live Broadcast.






The color is Viper Red and overall whoever did the body work and paint did an exceptional job. The paint has swirls left by a rotary buffer. And there are, tracers, arc scratches and just flat out dull sections next to edges where the sanding marks have not all been removed. So close, but no cigar...


I'm alway posting that a swirl-free finish can be created using only a rotary buffer but not everyone can do it. I find more examples of cars with swirls from rotary buffers than I do examples of cars without them.




This class is limited to the first 6 people that sign-up.

Sign-up List

0. Jon aka the owenr of the car
1. Chris aka Italian Guy
2. John aka miamijd7
3. Tim aka 57BORNTORUN
4. Louie
5. Jeff
6. Tom aka ShineTimeDetail
7. Paul aka Sailfish
8. Dan aka Muscle Express Dan
9.
10.





Date: Thursday, January 3rd, 2013
Time: 5:00pm to 10:00pm

Autogeek's Garage
7744 SW Jack James Drive
Stuart, FL 34997
Mapquest Driving Directions


The door to the right of the garage door is the entrance to our TV Studio, my
red Jimmy is usually parked right in front of the entrance door.

[oldmodman]

Is that a small dent just in front of you finger?

I hope not, after all that painting work. After the car is polished out that would be the only thing I would be able to see.

That is just about my favorite 60's Mustang body style.

[Mike Phillips]

***Update***


Upcoming Live Broadcast

The owner Jon and I discussed his car this last Sunday at the King Neptune's Car Show, specifically about how much clear was sprayed over the car and Jon thinks there's enough to re-sand it and then buff it out. At this time we're only planning on dampsanding the horizontal panels or the gloss panels as these are the most important panels as they are the most viewed panels.


This will be a live broadcast on either Thursday January 3rd or the 10th...


If you want to see machine wetsanding, or to be technically correct, machine dampsanding then "Subscribe" to this thread to be kept aware of updates.


When you subscribe to a thread, you have the option to be notified instantly of any new posts to this thread via e-mail. If you don't know how to subscribe to a thread, then start a thread asking how and you'll get an answer.

[Mike Phillips]

***Update***

Mark your calenders for Thursday, January 3rd to watch the live broadcast as we machine sand the horizontal panels on Jon's Mustang and then polish the paint to perfection in time for Jon to show his car at an upcoming car show.

[Mike Phillips]

***Bump***

This project is scheduled for Thursday, January 3rd.

[ShineTimeDetail]

OH BOY!! I wasn't planning on coming down till about a week into January but I think I might just have to come down a little early for this!!

[Mike Phillips]

OH BOY!! I wasn't planning on coming down till about a week into January but I think I might just have to come down a little early for this!!

Checked with Yancy and he said he should be available for a live broadcast...

This car is going on display at a car show the following weekend...

[Mike Phillips]

***Bump***


We have a lot of new people joining the forum everyday and this bump is for them. If you live in the Stuart, Florida area you are invited to attend this live broadcast to watch and in some cases help.

If you don't live in the Stuart, Florida area then be sure to mark your calendar to remember to come back to AutogeekOnline.net to watch the live broadcast.

Also share the link to this thread with your car buddies as it's pretty hard to find any other website or forum where you can watch this type of work life.

[Chris@AutoCleanse]

The old lady is off, so if you will have me I will be down for it.

Chris aka Italian Guy

[Chris@AutoCleanse]