Back With A Red Mazda3

[Mannyl312]

Well Guys it´s been long time since my last post, as I told on my last post I moved back to Venezuela and took me a little time to get all set and start detailing again, but here I am again doing what I like most detailing for fun on my free time, which is no that much right now only sundays and I got to start early in the morning 6:30 am in order to work out of the sun as much as possible, and as soon as I´m done, get a quick shower rest a little bit and hit the streets with my family to show proud my recently detailed car, here´s some pics form last sunday.

Take care guys and happy detailing

[joe.p]

your car looks great..Congrats on the move

[klumzypinoy]

Nice Mazda 3, I love how those cars look, especially the hatch backs. What was your process in this? Great job on the detail by the way

[Truls]

Looking great, looks like its hot there now....

One guy i know keeps going to Venezuela all the time, he tells me its great there, friendly, nice people...

[bill walsh]

wow great looking car

[Mannyl312]

Thanks a lot for your comments, about the process was not too hard cause the car is brand new, delivered july 18. so it´s been only a couple of months but as you should know even from the dealer you get it with some swirls and one little scratch here and there what I did.

Wash & Dry as allways with two bucket system.

then hit it With XMT3 Orange Edge Pad for inperfections.
XMT1 Yellow pad
XMTFinishing Glaze Blue Pad for deep gloss
Liquid Souveran White Pad.

At The end I Realize for next job I´m gonna have to hit with xmt4 for the little scratches. They´r still a little bit noticeable but I can deal with it till I get My next shipping
with some
Sig series II souveran
XMT4
XMT

[Mannyl312]

Thanks a lot for your comments, about the process was not too hard cause the car is brand new, delivered july 18. so it´s been only a couple of months but as you should know even from the dealer you get it with some swirls and one little scratch here and there what I did.

Wash & Dry as allways with two bucket system.

then hit it With XMT3 Orange Edge Pad for inperfections.
XMT1 Yellow pad
XMTFinishing Glaze Blue Pad for deep gloss
Liquid Souveran White Pad.

At The end I Realize for next job I´m gonna have to hit with xmt4 for the little scratches. They´r still a little bit noticeable but I can deal with it till I get My next shipping
with some
Sig series II souveran
XMT4
XMT 360
and some stuff more that I don´t recall

About the people here, Yes we like to be very friendly with every visitor, and we like to share all the natural beauties of my Beautifull country including our women, so all of you guys are welcome to visit me here in Caracas, just let me know and you´re on.

[Rsurfer]

Originally Posted by Mannyl312

Thanks a lot for your comments, about the process was not too hard cause the car is brand new, delivered july 18. so it´s been only a couple of months but as you should know even from the dealer you get it with some swirls and one little scratch here and there what I did.

Wash & Dry as allways with two bucket system.

then hit it With XMT3 Orange Edge Pad for inperfections.
XMT1 Yellow pad
XMTFinishing Glaze Blue Pad for deep gloss
Liquid Souveran White Pad.

At The end I Realize for next job I´m gonna have to hit with xmt4 for the little scratches. They´r still a little bit noticeable but I can deal with it till I get My next shipping
with some
Sig series II souveran
XMT4
XMT

Manny, why would you use a yellow cutting pad with xmt 1 and use an orange pad with a more aggresive xmt 3? And why a polishing white pad for a wax? IMO you should use either the blue or grey for waxing. Just wondering.

[supercharged]

Looks pretty good! nice color too.

[Mannyl312]

The pads thing is a confussion, I don´t know what kind of pads you´re refering to but i use Edge 2000 there´s no grey pad, the blue is a finishing pad 70 pores per inch which i use to apply glazes and sealants, and then you got the white pad which is 80 pores per inch and I use it to apply wax only I don´t use it for polishing, and the cutting pads I missplaced orders the yellow cutting pad was used to apply XMT3 for the swirls on a very hard clear coat and the orange with the XMT1.

For Waxes I know is better the red pad which is softer than the white but by the time I bought all my pads this wasn´t available yet For my next order I´ll get it