Guy came to me wanting to fix his hood but it had severe clear coat failure. He got it painted and waited two months and brought it back to me since the shop didn't do a great job buffing it. (severe marring, wet sanding marks, and swirling) He also wanted to clear up the head lights before spending more money on some new ones. Turned out great and about 90% corrected. The hood was the worst out of all of it but it turned out alright.
-Washed with Meguiars Hyper wash.
-Clayed w/blue clay magic.
-Wheels/Tires/Lug cylinders/Inner barrels/Wheel wells hit with APC+ 10:1 and scrubbed with various brushes.
-Tires/trim dressed with ShowroomFX White Pearl.
-Paint was corrected with D300 and a 5" MF cutting disk followed by D301 on a 5" MF Polishing disk.
-B Pillar trim was done with a 3" MF cutting disk and D300 followed by M205 on a 3" polishing disk followed by D301 on a 3" polishing disk.
- Head lights were wet sanded using 2500 grit, then 3000 grit, followed with M105 on a 3" cutting disk > M205 on a 3" polishing disk >Sealed with Meguiars headlight sealant
-Glass treated with Stoners crystal clear
Headlights before:
Headlights after:
Door before correction:
B pillar before:
B pillar trim before:
Driver side B pillar before:
B pillar trim before (oxidized and swirled):
Hood swirled:
Another shot:
And another:
Hood after:
Finished pictures:
Passenger side B pillar after (wind and dust was terrible on this day):
Driver side B pillar after:
Driver side B pillar trim polished:
Hood corrected and polished:
B pillar trim polished:
Hard top corrected and polished:
Hood corrected and polished:
B pillar after shown with a sun gun:
Questions/comments welcome.
Brian
Linear Mode
