My first try at a more serious detail

[Red350]

This was on my 3 month old 2007 Lexus IS350 which fortunately showed no
scratches or swirls so I skipped the prelim. stages of polishing.
Most of my supplies arrived last week so I began the process listed below.
I purchased a PC a month ago but not used it till now and then added some Edge pads. The AG store has been great
Thanks to all the great info given here I came up with the following steps:
1) wash (Mothers car shampoo already on hand)
2) clay (Pinnacle clay and lube)
3) prep (Klasse AIO)
4) sealant (WDGP)
5) final shine (Pinnacle Souveran paste wax)

I order the Pinnacle paste wax and spray this morning with a fast ship so
hopefully I will have that in time for step 5 this holiday weekend.

Given that this was my first attempt at a more serious detail with a PC-7424
and high quality products I was extemely grateful for your expertise
shared in this forum. I read, watched video clips, read,watched more clips,
and did I mention that I read more.
This was my first experience at claying a car but it went just as discribed
and I was amazed at the crap that came off considering that it was new
but since it did come here via the rail I should not be surprised.
I then snapped a white Edge 2000 pad on my PC and went to work with
the Klasse AIO. I then snapped on a second white pad on my PC went to
work with the Wolfgang sealant. Buffed both out by hand to glorious shine.
I ran out time before I could do more but I am SO VERY PLEASED with the
results so far. The PC is a must for me now.
Thank you for your help

I think I will do one more coat of the WDGP before I put on the Souveran.
What do you think??

Here is a poor pic I snapped at work today so I can show my progress.

Wayne

[ryandamartini]

looks great! And yes! one more coat of Wolfgang Deep Gloss is always good before souveran! Just do it 24 hours prior to.

[Red350]

Originally Posted by ryandamartini

looks great! And yes! one more coat of Wolfgang Deep Gloss is always good before souveran! Just do it 24 hours prior to.

Thank you!
How do I get the photo to post without the thumbnail?
I scaled it down to 640x480.

[ryandamartini]

Originally Posted by Red350

Thank you!
How do I get the photo to post without the thumbnail?
I scaled it down to 640x480.

I use photobucket personally.

www.photobucket.com

it gives you the links to your images beside them so you just copy and paste the locations.

[FloridaNative]

She looks awesome Wayne!! I can't wait to see the pics after the Souveran. Yeah the clay is amazing. When my car was new I clayed it and I had to throw the bar away afterwards it was so nasty! I agree with you about the second coat of WG before the final Souveran topper. Souveran is my absolute favorite wax! I can't wait to see your car in it! Great job!!

[FloridaNative]

I use photobucket too. After uploading it click on the IMG link underneath the photo and paste the link in the thread and it will post the image full size. Joe P. taught me this trick! Thanks again Joe P. I think you can do the same thing with the gallery at Autogeek. Somebody correct me if I'm wrong, ya'll know I'm no genious when it comes to computers and photos.

[ryandamartini]

ok, the captain guy has to go! :P

[FloridaNative]

Originally Posted by ryandamartini

ok, the captain guy has to go! :P

LMAO! Actually the Gorton's fisherman guy is a private joke between me and another forum member. Hopefully they are seeing this and laughing their arse off!

[ryandamartini]

Originally Posted by FloridaNative

LMAO! Actually the Gorton's fisherman guy is a private joke between me and another forum member. Hopefully they are seeing this and laughing their arse off!

Oh, haha

You should photoshop in some souveran or something :P

[FloridaNative]

Originally Posted by ryandamartini

Oh, haha

You should photoshop in some souveran or something :P

hahahahahahahaha You obviously haven't heard about my computer skills yet! lol