Finally i finished the wet sanding/polishing on my Civic..It took me about a week because i was doing part by part...Sorry for the large amount of picturs but it is my first time on this + rotary polishing....
I used the follow sand papers:
1000 grit Megs
2000 grit 3M
2500 GRIT Megs
3000 grit Megs
Sanding mark removal with Megs #85 + Megs twisted wool pad
Correction
Menzerna SIP+RD3.02 on LC CCS 6,5 orange foam pad
Menzerna RD3.02 + 106FF on LC CCS green foam pad
Menzerna 85RD 0n LC CCS 6,5'' black foam pad
DWG on the top
No LSP because the car has been resprayed 3 weeks ago...
So here we go with pictures
The hood
50/50 of the hood
The hood after
left side sanded
check here the level of orange peel
some 50/50 pictures
and some after
<img src="http://i275.photobucket.com/albums/jj302/accordcl7/pampos%201/DSC01453.jpg">
No before pictures for the other parts wet sanded so lets see the final results with the DWG applied
Linear Mode
